Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Donat Rudenskiy has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Feasibility of an Inconel mesh for the input absorber of an open cavity receiver at a solar tower

    by Andrii Cheilytko, Yaroslav Grosu, Donat Rudenskiy, Ainara Azpiazu, Eder Amayuelas, Robin Tim Broeske, Peter Schwarzbözl

    This study investigates the feasibility of using Inconel 600 wire mesh as an inlet absorber in open cavity receivers for solar tower applications. The effects of surface temperature gradients and fluid flow conditions on the thermo-mechanical behavior of the absorber are analyzed using a combined numerical and experimental approach. A semi-analytical model coupled with CFD simulations is employed to evaluate the temperature distribution and its dependence on mass flow rate and incident radiation. The results indicate that the ratio between mass flow and incident radiation is a key parameter governing thermal stability, with reduced values leading to localized hot spots. Post-experimental analysis, including optical microscopy, SEM, and XRD, reveals that degradation of the first mesh layer is primarily driven by stress-assisted oxidation. Local overheating, particularly in regions of non-uniform irradiation, promotes oxide scale formation and spallation, resulting in material damage.,The study further demonstrates that woven mesh structures exhibit two inherent limitations: non-uniform irradiation at wire intersections and local stress concentrations due to bending. These factors contribute to accelerated degradation under high-temperature conditions. It is therefore concluded that conventional woven wire mesh is not suitable for operation near the critical temperature limits of Inconel 600, and alternative configurations, such as straight-wire arrangements, are proposed as a promising design direction.

  • Open Access

    Numerical Modeling of Residual Stresses and Fracture Strengths of Ba0.5Sr0.5Co0.8Fe0.2O3−δ in Reactive Air Brazed Joints

    by Donat Rudenskiy, Simone Herzog, Lutz Horbach, Nils Christian Gebhardt, Felix Weber, Anke Kaletsch, Christoph Broeckmann

    Reactive Air Brazing (RAB) enables the joining of vacuum-sensitive oxide ceramics, such as Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF), to metals in a one-step process. However, damage may form in ceramic or joint during RAB. In this work, experimental microstructure characterization, measurement, and prediction of local material properties using finite element analysis were combined to enlighten these damage mechanisms, which are currently not well understood. Micromechanical simulations were performed using representative volume elements. Cooling simulations indicate that small-sized CuO precipitations are most likely to cause crack initiation in BSCF during cooling. The ball-on-three-balls experiment with porous BSCF samples was analyzed numerically to determine the values of temperature-dependent BSCF fracture stresses. The inversely calibrated fracture stresses in the bulk BSCF phase are underestimated, and true values should be quite high, according to an extreme value analysis of pore diameters.