Numerical analysis of the corrosion impact on the punching shear capacity of flat slabs with openings
- 21 January 2025
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 26 (4) , 5106-5124
Abstract
The effects generated by punching shear failure in flat slabs are catastrophic, as the failure of the slab‐column joint can cause a progressive collapse of the building. Furthermore, when exposed to aggressive environments, reinforced concrete structures can be degraded due to the penalization of the mechanical and geometric properties of the reinforcement and concrete. Therefore, this study intends to investigate the behavior of corroded reinforced concrete flat slabs with adjacent openings to the column. Three nonlinear finite element models of flat slabs based on experimental results were constructed and validated in the ABAQUS software and subsequently subjected to a parametric analysis to investigate the effects of different corrosion degrees on their punching shear capacity. The results demonstrated that corrosion of the reinforcement significantly affected the load capacity of the numerical models, reducing the ultimate load by up to 30%. Furthermore, the increase in corrosion caused an intensification of the cracking of the slabs, indicating that the cracking patterns increased as the degree of corrosion increased. The results obtained by experimental tests and numerical simulations were compared with predictions by the codes Eurocode, fib Model Code, American Concrete Institute 318, FprEN 1992 1‐1, and The Brazilian Association of Technical Standards Brazilian Regulatory Standard 6118. The results showed that most codes generate very conservative results.Keywords
This publication has 21 references indexed in Scilit:
- Nonlinear analysis of the impact of openings on punching shear strengthStructural Concrete, 2023
- Experimental, numerical, and theoretical study of punching shear capacity of corroded reinforced concrete slab-column jointsEngineering Structures, 2023
- Experimental, analytical, and numerical investigation of punching behaviour of two-way rc slab with multiple openingsStructures, 2022
- Punching shear strength of corroded reinforced concrete slab-column connectionsJournal of Building Engineering, 2022
- Nonlinear finite element analysis (NLFEA) of reinforced concrete flat slabs with holesStructures, 2020
- Failure analysis of punching in reinforced concrete flat slabs with openings adjacent to the columnEngineering Structures, 2019
- Investigation of the effect of openings of interior reinforced concrete flat slabsStructural Concrete, 2018
- Propagation of steel corrosion in concrete: Experimental and numerical investigationsCement and Concrete Composites, 2016
- Effects of openings on the punching shear strength of RC flat‐plate slabs without shear reinforcementThe Structural Design of Tall and Special Buildings, 2015
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989