Wear characteristics of functionally graded nanocrystalline Ni–P coatings
Authors:
- 1 September 2015
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 31 (9) , 693-700
Abstract
In this study, functionally graded Ni–P coatings with a gradual change of phosphorus content were deposited using a single electroless bath. For comparing tribological and mechanical properties, three types of single layer coatings were deposited. According to the results among the single layer coatings, medium P coating had the minimum wear resistance, while its hardness was not minimum. The main reason may be that the medium P coating had the minimum H/E ratio, and this ratio is a more appropriate parameter than hardness for predicting wear resistance. Results of nanoindentation test showed gradual changes in hardness profile in the cross-section of FGCs due to the gradual changes of phosphorus content in the thickness of the coatings and, consequently, gradual changes in structures. In addition, functionally graded coatings indicated much better wear resistance than single layer coatings because during the wear process cracks were effectively prevented through the thickness as a result of gradual composition and structures.Keywords
This publication has 33 references indexed in Scilit:
- Ultrasonic irradiation assisted electroless Ni–P coating on magnesium alloySurface Engineering, 2014
- Comparison of in situ and ex situ reduced graphene oxide reinforced electroless nickel phosphorus nanocomposite coatingApplied Surface Science, 2014
- Erosion-Corrosion Behavior of Electroless Ni-P Coating on Copper-Nickel Alloy in 3.5 wt.% Sodium Chloride SolutionJournal of Materials Engineering and Performance, 2013
- High temperature tribology of nanocrystalline Ni–P–Ag coatingSurface Engineering, 2013
- AISI 420 martensitic stainless steel low-temperature plasma assisted carburizing kineticsSurface and Coatings Technology, 2013
- Mechanical and corrosion resistant properties of martensitic stainless steel plasma nitrocarburized with rare earths additionJournal of Rare Earths, 2012
- Porosity measurement of electroless Ni–P coatings reinforced by CNT or SiC particlesSurface Engineering, 2012
- Study on post‐treatments for electroless Ni–P coatingSurface Engineering, 2011
- A study on the microstructure and phase transformation of electroless nickel depositsJournal of Materials Science, 1988
- Electron Microscope Study of the Nucleation and Growth of Electroless Cobalt and NickelJournal of the Electrochemical Society, 1972