Numerical Modeling of the Effect of Mechanical Vibration on 10 kg C45 Steel Ingot Solidification
- 16 May 2019
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 90 (8)
Abstract
Numerical modeling of the solidification structure evolution has been performed to predict the structure development during the solidification of a 10 kg C45 steel ingot. The model consists of two schemes: The Finite Difference method (FD) for the macroscopic heat transport of the unsteady two‐dimensional temperature field in solidifying metal and the Cellular Automaton (CA) method for simulating the evolution of as‐cast structures. The effect of mechanical vibration (MV) is evaluated from the aspects of increasing the apparent thermal conductivity of the liquid and the nucleation probability. An increased effective thermal conductivity by MV is assumed in the liquid phase. A 10% larger nucleation probability is also assumed to introduce the increased nucleation sites due to dendrite fragmentation caused by the imposition of MV. The simulation results are validated by the hot model experiments regarding the grain morphology and the temperature profile. The results of numerical modeling agree well with the experimental results and can be used for predicting the solidification structure evolution under various conditions.Keywords
This publication has 22 references indexed in Scilit:
- Effects of Mechanical Vibration on Cooling Rate and DAS of AC4C Aluminum Alloy Gravity Die CastingsMATERIALS TRANSACTIONS, 2009
- Numerical Simulation of Solidification Structure Formation during Continuous Casting in Fe-0.7mass%C Alloy Using Cellular Automaton MethodISIJ International, 2006
- Effect of Mechanical Vibration on the Microstructure, Impact Toughness and Thermal Fatigue Behavior of Cast Hot Working Die SteelISIJ International, 2004
- A Modified Cellular Automaton Model for the Simulation of Dendritic Growth in Solidification of Alloys.ISIJ International, 2001
- Numerical modeling of solidification morphologies and segregation patterns in cast dendritic alloysActa Materialia, 1999
- A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processesActa Metallurgica et Materialia, 1994
- Probabilistic modelling of microstructure formation in solidification processesActa Metallurgica et Materialia, 1993
- Computer simulation of grain growth and macrostructure development during solidificationMaterials Science and Technology, 1989
- Theory of microstructural development during rapid solidificationActa Metallurgica, 1986
- Dendritic growth into undercooled alloy metalsMaterials Science and Engineering, 1984