Dieter Senk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dieter Senk has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Joao Luiz Lopes Rezende
GTT-Technologies, Herzogenrath, Germany
2 shared publications A. Babich
Institut für Eisenhüttenkunde/IEHK - RWTH Aachen, Intzestraße 1, 52072 Aachen, Germany
1 shared publicationA. Diaz
ArcelorMittal España S.A., R&D Technological Centre–CDT, P.O. Box. 90, 33400 Avilés, Spain
1 shared publication- Ajay Kumar Shukla
Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Madras, Chennai, India
1 shared publication - Alexander Babich
Steel Institute (IEHK), RWTH Aachen University, 52062 Aachen, Germany
1 shared publication - Antônio Cezar Faria Vilela
Universidade Federal do Rio Grande do Sul, Brasil
1 shared publication
Latest Publications
- Open Access
Multi-Step Recycling of BF Slag Heat via Biomass for CO2 Mitigation
Iron- and steelmaking processes create slags, valuable by-products. Industrial utilisation of slag as a lower-value secondary mineral source has been established for decades. Slag heat recovery is an ongoing research topic and has the potential to maximise energy efficiency in iron and steel production. Heat recuperation aims to tap the unused thermal recycling potential of molten slags. This short communication expands the concept for the utilisation of recovered heat for producing torrefied biomass and biogas. The torrefaction process is linked with slag heat recovery and via the BASE method with enhanced blast furnace operation. Such a combination reduces CO2 emissions significantly in ironmaking processes. Assuming a coke consumption of 350 kg coke per tonne of hot metal and replacing it with 5% torrefied biomass injected as PC with an additional 100 m3/tHM biogas injection, the BF’s CO2 emission related to the coke can be lowered by 7.9% to 108 kg/tHM. In such a manner, the recovered slag heat can directly contribute to CO2-footprint reduction and improve the circular economy and metallurgical sustainability.
Open AccessMulti-Step Recycling of BF Slag Heat via Biomass for CO2 Mitigation
Iron- and steelmaking processes create slags, valuable by-products. Industrial utilisation of slag as a lower-value secondary mineral source has been established for decades. Slag heat recovery is an ongoing research topic and has the potential to maximise energy efficiency in iron and steel production. Heat recuperation aims to tap the unused thermal recycling potential of molten slags. This short communication expands the concept for the utilisation of recovered heat for producing torrefied biomass and biogas. The torrefaction process is linked with slag heat recovery and via the BASE method with enhanced blast furnace operation. Such a combination reduces CO2 emissions significantly in ironmaking processes. Assuming a coke consumption of 350 kg coke per tonne of hot metal and replacing it with 5% torrefied biomass injected as PC with an additional 100 m3/tHM biogas injection, the BF’s CO2 emission related to the coke can be lowered by 7.9% to 108 kg/tHM. In such a manner, the recovered slag heat can directly contribute to CO2-footprint reduction and improve the circular economy and metallurgical sustainability.
- Open Access
- 24 September 2021
- Published by Wiley in Steel Research International
- Vol. 92 (12)
Investigations on Decreased High Temperature Ductility of Different Continuously Cast Steel Grades
Continuous casting of premium steel grades requires a process with a high degree of precision and the knowledge about the mechanical behavior of the steel at temperatures above 800 °C. Herein, several origins of effects which lead to unwanted impairment of the hot strand shell like segregations, size, amount, kind, and distribution of precipitates as well as porosities from a metallurgical point of view are dealt. The systematic description of potential defect reasons helps to predict harmful operation parameters in context with the chemical composition of steel grades. A compilation of results from experiments at Department of Ferrous Metallurgy of RWTH Aachen University is complemented by a literature review. It is focused on the high temperature ductility and the underlying mechanisms inside the solidifying steel. Finally, potential measures to adjust the continuous casting process to prevent defects are elaborated.
- 24 September 2021
- Published by Wiley in Steel Research International
- Vol. 92 (12)
Open AccessInvestigations on Decreased High Temperature Ductility of Different Continuously Cast Steel Grades
Continuous casting of premium steel grades requires a process with a high degree of precision and the knowledge about the mechanical behavior of the steel at temperatures above 800 °C. Herein, several origins of effects which lead to unwanted impairment of the hot strand shell like segregations, size, amount, kind, and distribution of precipitates as well as porosities from a metallurgical point of view are dealt. The systematic description of potential defect reasons helps to predict harmful operation parameters in context with the chemical composition of steel grades. A compilation of results from experiments at Department of Ferrous Metallurgy of RWTH Aachen University is complemented by a literature review. It is focused on the high temperature ductility and the underlying mechanisms inside the solidifying steel. Finally, potential measures to adjust the continuous casting process to prevent defects are elaborated.
- 16 May 2019
- Published by Wiley in Steel Research International
- Vol. 90 (8)
Numerical Modeling of the Effect of Mechanical Vibration on 10 kg C45 Steel Ingot Solidification
Numerical modeling of the solidification structure evolution has been performed to predict the structure development during the solidification of a 10 kg C45 steel ingot. The model consists of two schemes: The Finite Difference method (FD) for the macroscopic heat transport of the unsteady two‐dimensional temperature field in solidifying metal and the Cellular Automaton (CA) method for simulating the evolution of as‐cast structures. The effect of mechanical vibration (MV) is evaluated from the aspects of increasing the apparent thermal conductivity of the liquid and the nucleation probability. An increased effective thermal conductivity by MV is assumed in the liquid phase. A 10% larger nucleation probability is also assumed to introduce the increased nucleation sites due to dendrite fragmentation caused by the imposition of MV. The simulation results are validated by the hot model experiments regarding the grain morphology and the temperature profile. The results of numerical modeling agree well with the experimental results and can be used for predicting the solidification structure evolution under various conditions.
- 16 May 2019
- Published by Wiley in Steel Research International
- Vol. 90 (8)
Numerical Modeling of the Effect of Mechanical Vibration on 10 kg C45 Steel Ingot Solidification
Numerical modeling of the solidification structure evolution has been performed to predict the structure development during the solidification of a 10 kg C45 steel ingot. The model consists of two schemes: The Finite Difference method (FD) for the macroscopic heat transport of the unsteady two‐dimensional temperature field in solidifying metal and the Cellular Automaton (CA) method for simulating the evolution of as‐cast structures. The effect of mechanical vibration (MV) is evaluated from the aspects of increasing the apparent thermal conductivity of the liquid and the nucleation probability. An increased effective thermal conductivity by MV is assumed in the liquid phase. A 10% larger nucleation probability is also assumed to introduce the increased nucleation sites due to dendrite fragmentation caused by the imposition of MV. The simulation results are validated by the hot model experiments regarding the grain morphology and the temperature profile. The results of numerical modeling agree well with the experimental results and can be used for predicting the solidification structure evolution under various conditions.
- 5 January 2017
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 48 (2) , 763-771
Cold Model-Based Investigations to Study the Effects of Operational and Nonoperational Parameters on the Ruhrstahl–Heraeus Degassing Process
- 5 January 2017
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 48 (2) , 763-771
Cold Model-Based Investigations to Study the Effects of Operational and Nonoperational Parameters on the Ruhrstahl–Heraeus Degassing Process
- 16 April 2015
- Published by Wiley in Steel Research International
- Vol. 87 (1) , 107-111
Nitrogen Solubility in High‐Manganese Steel Grades
The solubility of nitrogen in molten steel depends on temperature and also on the concentration of alloyed elements. In this work, the variation of nitrogen content is investigated as a function of the manganese content at varied nitrogen partial pressures in atmosphere. Previous works are compared to the experimental results of this study. Furthermore, a second order interaction coefficient was determined for nitrogen partial pressures from 60 to 1013 mbar and a [Mn] content up to 30 wt% Those investigations have been carried‐out to receive more data for the design of metallurgical processes concerning the production of the new group of high [Mn]‐steel grades with extraordinary properties combinations like high strength simultaneously with high formability.
- 16 April 2015
- Published by Wiley in Steel Research International
- Vol. 87 (1) , 107-111
Nitrogen Solubility in High‐Manganese Steel Grades
The solubility of nitrogen in molten steel depends on temperature and also on the concentration of alloyed elements. In this work, the variation of nitrogen content is investigated as a function of the manganese content at varied nitrogen partial pressures in atmosphere. Previous works are compared to the experimental results of this study. Furthermore, a second order interaction coefficient was determined for nitrogen partial pressures from 60 to 1013 mbar and a [Mn] content up to 30 wt% Those investigations have been carried‐out to receive more data for the design of metallurgical processes concerning the production of the new group of high [Mn]‐steel grades with extraordinary properties combinations like high strength simultaneously with high formability.
- 30 April 2012
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 19 (5) , 391-398
Lab experiments on the innovative rapid thick strip casting process
- 30 April 2012
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 19 (5) , 391-398
Lab experiments on the innovative rapid thick strip casting process
- 25 March 2011
- Published by Wiley in Steel Research International
- Vol. 82 (6) , 632-637
In‐Situ Measurement of CO‐ and CO2‐Concentrations in BOF Off‐Gas
- 25 March 2011
- Published by Wiley in Steel Research International
- Vol. 82 (6) , 632-637
In‐Situ Measurement of CO‐ and CO2‐Concentrations in BOF Off‐Gas
- 21 January 2010
- Published by Wiley in Steel Research International
- Vol. 81 (1) , 9-16
Reactivity and Conversion Behaviour of Brazilian and Imported Coals, Charcoal and Blends in view of their Injection into Blast Furnaces
For about 10 years the steel industry in Brazil has been using pulverized coal injection (PCI) technology in blast furnaces based on imported coals. In order to decrease the dependence on imported coals, Brazilian coal which has limited use due to high ash content is suggested to be mixed with imported coal and charcoal. The aim of this study is to examine the reactivity and combustion behaviour of the mentioned materials. The use of charcoal in the Brazilian steel industry reduces the CO2 emissions, since it represents a renewable source of carbon. The reactivity of the coal, charcoal and mixtures is evaluated through TGA. To provide a useful insight into the practice of PCI in blast furnaces, experiments are carried out with a laboratory rig at RWTH Aachen University that simulates the behaviour of fines injected into the raceway. The results of this study are presented and discussed.
- 21 January 2010
- Published by Wiley in Steel Research International
- Vol. 81 (1) , 9-16
Reactivity and Conversion Behaviour of Brazilian and Imported Coals, Charcoal and Blends in view of their Injection into Blast Furnaces
For about 10 years the steel industry in Brazil has been using pulverized coal injection (PCI) technology in blast furnaces based on imported coals. In order to decrease the dependence on imported coals, Brazilian coal which has limited use due to high ash content is suggested to be mixed with imported coal and charcoal. The aim of this study is to examine the reactivity and combustion behaviour of the mentioned materials. The use of charcoal in the Brazilian steel industry reduces the CO2 emissions, since it represents a renewable source of carbon. The reactivity of the coal, charcoal and mixtures is evaluated through TGA. To provide a useful insight into the practice of PCI in blast furnaces, experiments are carried out with a laboratory rig at RWTH Aachen University that simulates the behaviour of fines injected into the raceway. The results of this study are presented and discussed.
- 1 November 2007
- Published by Springer Nature in BHM Berg- und Hüttenmännische Monatshefte
- Vol. 152 (11) , 361-366
Simulation and Modelling of Hot Ductility for Different Steel Grades
- 1 November 2007
- Published by Springer Nature in BHM Berg- und Hüttenmännische Monatshefte
- Vol. 152 (11) , 361-366
Simulation and Modelling of Hot Ductility for Different Steel Grades
- 16 July 2007
- Published by Wiley in Advanced Engineering Materials
- Vol. 9 (8) , 695-702
Estimation of Segregation in Iron‐Manganese Steels
- 16 July 2007
- Published by Wiley in Advanced Engineering Materials
- Vol. 9 (8) , 695-702
Estimation of Segregation in Iron‐Manganese Steels