Corrosion Depth Inversion Method Based on the Lift-Off Effect of the Capacitive Imaging (CI) Technique
Open Access
- 29 January 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 22770-22779
Abstract
As a new Non-destructive Evaluation (NDE) technique, capacitive imaging (CI) has been used to detect defects in oil pipelines, composite sucker rods and storage tanks in recent years. When a CI sensor is used to detect corrosion defect on a conducting surface with or without an insulation layer, the depth information of corrosion defect is difficult to acquire due to the non-linearity of the probing field. This paper proposed a corrosion depth inversion method based on the lift-off effect of the CI technique. The proposed depth inversion method, which includes three steps, namely establishing the lift-off curve, obtaining the scan curve and fitting inversion, are introduced and evaluated. In the FE simulations, the error rates of the inversion depths are less than 1.20%. CI experiments were carried out to acquire the depth information of a step shape specimen using the CI experimental system and the proposed corrosion depth inversion method. The results show that the depth inversion method can meet the need of obtaining the actual depth information with the error rates of the inversion depths being less than 10.00%. A CI experiment on a machined and corroded specimen was carried out to further demonstrate the feasibility of the proposed inversion method for corrosion defects with different depths. Both results from FE models and experiments indicate that the proposed method is promising to achieve the quantitative NDE of the Corrosion Under Insulation (CUI).Keywords
Funding Information
- National Natural Science Foundation of China (51675536, 51574276)
- Fundamental Research Funds for the Central Universities (18CX02084A)
- Postgraduate Innovation Project of the China University of Petroleum (YCX2019057)
- National Postdoctoral Program for Innovative Talents (BX20190386)
- China Postdoctoral Science Foundation (2019M662461)
This publication has 21 references indexed in Scilit:
- Scanning Electrochemical Microscopy for the Investigation of Galvanic Corrosion of Iron with Zinc in 0.1 M NaCl SolutionJournal of Materials Engineering and Performance, 2016
- An NDT guided wave technique for the identification of corrosion defects at support locationsNDT & E International, 2015
- A Submicrowatt Implantable Capacitive Sensor System for Biomedical ApplicationsIEEE Transactions on Circuits and Systems II: Express Briefs, 2014
- Sensitivity analysis of the non-destructive evaluation of micro-cracks using GMR sensorsNDT & E International, 2014
- Studies of the factors influencing the imaging performance of the capacitive imaging techniqueNDT & E International, 2013
- The feasibility of synthetic aperture guided wave imaging to a mobile sensor platformNDT & E International, 2013
- Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive x-ray attenuation measurementsCement and Concrete Research, 2011
- Applying Ultrasonic Testing to Detect Hole Defect Near the SurfaceAdvanced Materials Research, 2011
- The use of infrared thermography in the corrosion science areaMaterials and Corrosion, 2010
- Further investigations into capacitive imaging for NDEInsight - Non-Destructive Testing and Condition Monitoring, 2009