An Ultrasonic Micro-Tool Assisted Platform for Post-Processing of Micrometer-Scale Copper Wires
Open Access
- 27 March 2026
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 17 (4) , 411
Abstract
Acoustic microactuation technology has emerged as an effective approach for fabrication of micro- and nanoscale objects, enabling precise processing and shaping control of microscale materials by efficiently transmitting ultrasonic vibration energy and focusing energy locally. In this work, the proposed platform is regarded as an acoustically driven micromachine, in which ultrasonic excitation acts as the primary microactuation mechanism. Micrometer-scale copper wires are widely used in microelectronics and precision manufacturing. However, their small dimensions and low rigidity make fixation and forming particularly challenging. To achieve controllable forming of fine copper wires, this study introduces an ultrasonic vibration energy-focusing principle and investigates an ultrasonic post-processing method tailored for such materials, with the aim of enhancing processing stability and forming accuracy. An ultrasonic processing experimental platform for copper wires was established, and multiple micro-tool designs—including glass fiber, 304 stainless steel wire with support, and elastic hard 304 stainless steel—were evaluated. Single-point and continuous processing experiments were conducted by varying micro-tool materials and support configurations, and the influence of feed speed on processing width and depth was systematically analyzed. The results indicate that a hard 304 stainless steel micro-tool supported by a hard plastic ring provides the best overall performance. Feed speed has a significant effect on processing depth, with a maximum average depth of approximately 0.95 μm achieved at a feed speed of 1 mm/min. These findings demonstrate the feasibility of ultrasonic processing for the effective forming of fine copper wires and confirm that appropriate micro-tool design and feed speed are critical for achieving stable and reliable processing results. The proposed system employs an ultrasonically actuated micro-tool to perform post-processing on micrometer-scale copper wires. The ultrasonic vibration serves as a microactuation mechanism that enhances local deformation and material response during micro-machining.Keywords
Funding Information
- Jiangsu Government Scholarship for Overseas Studies (JS-2024-7)
- natural science research projects of Jiangsu Universities (18KJA4600050)
- natural science research projects of Jiangsu Universities (21KJB460010)
- high-level talent project of “six talent peaks” in Jiangsu Province (GDZB-024)
- Open project of National Key Laboratory of Robotics (2018-016)
- National Natural Science Foundation of China https://ror.org/01h0zpd94 (51305209)
- Youth Science and Technology Innovation Fund of Nanjing Forestry University (CX2019009)
This publication has 19 references indexed in Scilit:
- Metal micro-hole array processing technologies: research progress, challenges, and future perspectivesThe International Journal of Advanced Manufacturing Technology, 2026
- Laser-ultrasonic vibration hybrid assisted machining in advanced difficult-to-cut materials: Technologies, mechanisms, and challengesJournal of Materials Processing Technology, 2025
- Ultrasonic Vibration-Assisted Machining Particle-Reinforced Al-Based Metal Matrix Composites—A ReviewMetals, 2025
- Mechanical properties and microstructure evolution of T2 copper in multimodal ultrasonic vibration assisted micro-compressionJournal of Materials Science & Technology, 2024
- A flexible ultrasonic micro tool-based AgNS fabrication processApplied Nanoscience, 2018
- Micro texturing on metallic surfaces: State of the artProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016
- Challenges and developments of copper wire bonding technologyMicroelectronics Reliability, 2012
- Overview of wire bonding using copper wire or insulated wireMicroelectronics Reliability, 2011
- Wire bonding using copper wireMicroelectronics International, 2009
- Direct gold and copper wires bonding on copperMicroelectronics Reliability, 2003