Tian Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tian Zhang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Xu Wang
College of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, China
2 shared publications - Yinlong Zhu
College of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, China
2 shared publications - Chengjia Zhu
College of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, China
1 shared publication - Guanyu Fu
College of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, China
1 shared publication - Junchao Zhang
College of Aeronautics and Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication - Qiang Tang
Jiangsu Key Laboratory of Advanced Manufacturing Technology, Faculty of Mechanical and Material Engineering, Huaiyin Institute of Technology, Huaian 223003, China
1 shared publication
Latest Publications
- Open Access
- 27 March 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (4) , 411
An Ultrasonic Micro-Tool Assisted Platform for Post-Processing of Micrometer-Scale Copper Wires
Acoustic microactuation technology has emerged as an effective approach for fabrication of micro- and nanoscale objects, enabling precise processing and shaping control of microscale materials by efficiently transmitting ultrasonic vibration energy and focusing energy locally. In this work, the proposed platform is regarded as an acoustically driven micromachine, in which ultrasonic excitation acts as the primary microactuation mechanism. Micrometer-scale copper wires are widely used in microelectronics and precision manufacturing. However, their small dimensions and low rigidity make fixation and forming particularly challenging. To achieve controllable forming of fine copper wires, this study introduces an ultrasonic vibration energy-focusing principle and investigates an ultrasonic post-processing method tailored for such materials, with the aim of enhancing processing stability and forming accuracy. An ultrasonic processing experimental platform for copper wires was established, and multiple micro-tool designs—including glass fiber, 304 stainless steel wire with support, and elastic hard 304 stainless steel—were evaluated. Single-point and continuous processing experiments were conducted by varying micro-tool materials and support configurations, and the influence of feed speed on processing width and depth was systematically analyzed. The results indicate that a hard 304 stainless steel micro-tool supported by a hard plastic ring provides the best overall performance. Feed speed has a significant effect on processing depth, with a maximum average depth of approximately 0.95 μm achieved at a feed speed of 1 mm/min. These findings demonstrate the feasibility of ultrasonic processing for the effective forming of fine copper wires and confirm that appropriate micro-tool design and feed speed are critical for achieving stable and reliable processing results. The proposed system employs an ultrasonically actuated micro-tool to perform post-processing on micrometer-scale copper wires. The ultrasonic vibration serves as a microactuation mechanism that enhances local deformation and material response during micro-machining.
- 27 March 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (4) , 411
Open AccessAn Ultrasonic Micro-Tool Assisted Platform for Post-Processing of Micrometer-Scale Copper Wires
Acoustic microactuation technology has emerged as an effective approach for fabrication of micro- and nanoscale objects, enabling precise processing and shaping control of microscale materials by efficiently transmitting ultrasonic vibration energy and focusing energy locally. In this work, the proposed platform is regarded as an acoustically driven micromachine, in which ultrasonic excitation acts as the primary microactuation mechanism. Micrometer-scale copper wires are widely used in microelectronics and precision manufacturing. However, their small dimensions and low rigidity make fixation and forming particularly challenging. To achieve controllable forming of fine copper wires, this study introduces an ultrasonic vibration energy-focusing principle and investigates an ultrasonic post-processing method tailored for such materials, with the aim of enhancing processing stability and forming accuracy. An ultrasonic processing experimental platform for copper wires was established, and multiple micro-tool designs—including glass fiber, 304 stainless steel wire with support, and elastic hard 304 stainless steel—were evaluated. Single-point and continuous processing experiments were conducted by varying micro-tool materials and support configurations, and the influence of feed speed on processing width and depth was systematically analyzed. The results indicate that a hard 304 stainless steel micro-tool supported by a hard plastic ring provides the best overall performance. Feed speed has a significant effect on processing depth, with a maximum average depth of approximately 0.95 μm achieved at a feed speed of 1 mm/min. These findings demonstrate the feasibility of ultrasonic processing for the effective forming of fine copper wires and confirm that appropriate micro-tool design and feed speed are critical for achieving stable and reliable processing results. The proposed system employs an ultrasonically actuated micro-tool to perform post-processing on micrometer-scale copper wires. The ultrasonic vibration serves as a microactuation mechanism that enhances local deformation and material response during micro-machining.
- Open Access
Modeling and Relative Permittivity Modulation of Cu/PDMS Capacitive Flexible Sensor for Pressure Sensing
This study aims to establish an equivalent parallel capacitance model for a copper/polydimethylsiloxane (Cu/PDMS) capacitive flexible pressure sensor and modulate its relative permittivity to optimize pressure sensing performance. The Cu/PDMS composite material is an ideal dielectric layer for sensors due to its high dielectric constant and tunable elasticity. By adjusting the different mixing ratios of PDMS and copper particles in micro size, the components and structure properties of the composite material can be modified, thereby affecting the electrical and mechanical performance of the sensor. We used finite element analysis (FEA) to model the sensor structure and studied the capacitance changes under various normal loading conditions to assess its sensitivity and distribution characteristics. Experimental results show that the sensor has good sensitivity and repeatability in the pressure range of 0 to 50 kPa. Additionally, we explored the effect of the addition of carbon black particles. It could be inferred that the added carbon black can enhance electrical properties due to its conductivity, which would be consequenced by the distribution optimization of Cu particles for carbon black’s low density, and it can mechanically restore some flexibility up to nearly 20%. Through these studies, our work can provide theoretical support for the design and application of flexible pressure sensors.
Open AccessModeling and Relative Permittivity Modulation of Cu/PDMS Capacitive Flexible Sensor for Pressure Sensing
This study aims to establish an equivalent parallel capacitance model for a copper/polydimethylsiloxane (Cu/PDMS) capacitive flexible pressure sensor and modulate its relative permittivity to optimize pressure sensing performance. The Cu/PDMS composite material is an ideal dielectric layer for sensors due to its high dielectric constant and tunable elasticity. By adjusting the different mixing ratios of PDMS and copper particles in micro size, the components and structure properties of the composite material can be modified, thereby affecting the electrical and mechanical performance of the sensor. We used finite element analysis (FEA) to model the sensor structure and studied the capacitance changes under various normal loading conditions to assess its sensitivity and distribution characteristics. Experimental results show that the sensor has good sensitivity and repeatability in the pressure range of 0 to 50 kPa. Additionally, we explored the effect of the addition of carbon black particles. It could be inferred that the added carbon black can enhance electrical properties due to its conductivity, which would be consequenced by the distribution optimization of Cu particles for carbon black’s low density, and it can mechanically restore some flexibility up to nearly 20%. Through these studies, our work can provide theoretical support for the design and application of flexible pressure sensors.