Sweep test protocol for fatigue evaluation of asphalt mixtures
- 13 February 2018
- journal article
- research article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 20 (5) , 1131-1144
Abstract
This paper presents a laboratory test protocol for evaluating fatigue properties of asphalt mixtures through sweep tests at multiple amplitudes and frequencies. Conventional fatigue evaluation of asphalt mixtures typically relies on a limited number of single fatigue tests, and each test is performed at constant test temperature. Moreover, in order to reduce laboratory effort to a minimum, testing is quite often limited to a single test temperature, which means that the dependency of asphalt fatigue on temperature is ignored. Such test procedure is in best accordance with the European Standards. However, so-derived results may provoke misleading conclusions, as exemplarily shown in this study. In order to solve this shortcoming, a sweep test protocol for fatigue evaluation of asphalt mixtures at different temperatures is proposed. Frequency–amplitude sweeps are used for complex modulus evaluation and fatigue evaluation, but without significantly extending the laboratory effort compared to conventional fatigue testing. This sweep test protocol is applicable for fatigue evaluation of any asphalt mixture.Keywords
This publication has 6 references indexed in Scilit:
- Influence of rest period on asphalt recovery considering nonlinearity and self-heatingConstruction and Building Materials, 2017
- Complex modulus and fatigue performances of bituminous mixtures with reclaimed asphalt pavement and a recycling agent of vegetable originRoad Materials and Pavement Design, 2016
- The German segmented steel roller compaction method – state-of-the-art reportInternational Journal of Pavement Engineering, 2013
- Simplification of Linear Amplitude Sweep Test and Specification ParameterTransportation Research Record: Journal of the Transportation Research Board, 2013
- Nonlinearity, Heating, Fatigue and Thixotropy during Cyclic Loading of Asphalt MixturesRoad Materials and Pavement Design, 2011
- State of the Art Report on Ageing Test Methods for Bituminous Pavement MaterialsInternational Journal of Pavement Engineering, 2003