Tunable In-series Laser Array With Duplex Distributed Feedback Sections
- 8 February 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (12) , 3882-3890
Abstract
The tunable laser based on distributed feedback (DFB) laser array has a good single-longitudinal-mode property, high wavelength stability, narrow spectrum linewidth, and feasibility for monolithic integration. The tunable in-series DFB laser array (TIDLA) was proposed to avoid the large extra power loss by the optical combiner. But in the TIDLA, a large laser count will cause a large chip length, which brings about low utilization ratio of material, poor mechanical strength, and large power consumption. In this paper, we demonstrated a 4-channel TIDLA with duplex DFB sections. The total chip length was greatly shortened owing the duplexing of DFB sections. A long linearly chirped Bragg grating is implemented in the laser cavity to reduce the grating interference among different lasers. Multiple π phase shifts and two reflector sections are introduced to improve the mode stability. The designed channel spacing is 100 GHz, and the reconstruction-equivalent-chirp technique is used to provide high precision control of the grating phase. Noted that a variation of 0.1 nm in grating period will cause that of 0.65 nm in wavelength. Output power of above 4 mW, SMSR of above 42 dB, and small wavelength deviation of within 0.15 nm was obtained. Besides, fast channel switches of less than 1 μ s are obtained by laser on/off switching. The proposed TIDLA might be applied in the NG-PON2 network where the dense wavelength division multiplexing technique and fast channel switching are required.Keywords
Funding Information
- Chinese National Key Basic Research Special Fund (2018YFA0704402, 2017YFA0206401, 2018YFB2201801)
- National Key R&D Program of China (2018YFE0201200)
- National Natural Science Foundation of China (62004094, 61975075)
- Nature Science Foundation of Jiangsu Province of China (BK20200334)
- Jiangsu Science and Technology (BE2017003-2)
- Science and Technology Support Program of Jiangsu Province (BE2019101)
- Suzhou Technological Innovation of Key Industries (SYG201844)
- Fundamental Research Funds for the Central Universities (021314380172)
This publication has 20 references indexed in Scilit:
- Physical Layer Aspects of NG-PON2 Standards—Part 1: Optical Link Design [Invited]Journal of Optical Communications and Networking, 2015
- High channel count and high precision channel spacing multi-wavelength laser array for future PICsScientific Reports, 2014
- Simple and compact V-cavity semiconductor laser with 50×100 GHz wavelength tuningOptics Express, 2013
- Experimental demonstration of eight-wavelength distributed feedback semiconductor laser array using equivalent phase shiftOptics Letters, 2012
- High-Power, Low RIN 1.55-$\mu{\rm m}$ Directly Modulated DFB Lasers for Analog Signal TransmissionIEEE Photonics Technology Letters, 2011
- Access and Metro Networks Based on WDM TechnologiesJournal of Lightwave Technology, 2004
- Proposal of Electrically Tunable External-Cavity Laser DiodeIEEE Photonics Technology Letters, 2004
- Tunable Semiconductor Lasers: A TutorialJournal of Lightwave Technology, 2004
- Relative intensity noise characteristics of injection-locked semiconductor lasersApplied Physics Letters, 2000
- Design of distributed feedback fibre lasers1997