A High-Gain Multilevel dc–dc Converter for Interfacing Electric Vehicle Battery and Inverter
- 21 June 2022
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (5) , 6506-6518
Abstract
An isolated multilevel bidirectional dc-dc converter is presented in this paper to interface the low voltage (LV) battery and the high voltage (HV) propulsion inverter in electric vehicles. The proposed topology achieves a high voltage step-up ratio in the motoring mode by reconfiguring two split capacitor half-bridge circuits in series/parallel through the symmetrical modulation of a voltage bidirectional, two quadrant switch. This reconfiguration generates a high-frequency multilevel voltage output at the dc bus side of the inverter, which reduces the output filter volume. The dc bus voltage is regulated by the duty cycle modulation of the intermediary switch in the motoring mode, simplifying the sensing and control. During regenerative braking, the converter is operated with phase shift modulation between the HV half bridges and the LV full bridge to regulate the battery voltage. The presented modulation strategies achieve ZVS for the full bridge devices over a wide load range. A comprehensive analysis of the proposed multilevel converter in motoring and braking modes along with the design constraints and soft switching boundary conditions is presented in this paper. Detailed experimental results on a 1.5 kW laboratory prototype are presented to verify the design approach and illustrate the converter performance.Keywords
This publication has 26 references indexed in Scilit:
- Comprehensive Analyses and Comparison of 1 kW Isolated DC–DC Converters for Bidirectional EV Charging SystemsIEEE Transactions on Transportation Electrification, 2016
- Parasitics-Assisted Soft-Switching and Secondary Modulated Snubberless Clamping Current-Fed Bidirectional Voltage Doubler for Fuel Cell VehiclesIEEE Transactions on Vehicular Technology, 2016
- Novel Isolated Multilevel DC–DC Power ConverterIEEE Transactions on Power Electronics, 2015
- Performance Analysis of Bidirectional DC–DC Converters for Electric VehiclesIEEE Transactions on Industry Applications, 2015
- Modeling and Analyzing Multiport Isolation Transformer Capacitive Components for Onboard Vehicular Power ConditionersIEEE Transactions on Industrial Electronics, 2014
- Operation, design and control of dual H-bridge-based isolated bidirectional DC–DC converterIET Power Electronics, 2008
- Multiphase Bidirectional Flyback Converter Topology for Hybrid Electric VehiclesIEEE Transactions on Industrial Electronics, 2008
- Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric VehiclesIEEE Transactions on Industrial Electronics, 2008
- Topological Overview of Hybrid Electric and Fuel Cell Vehicular Power System Architectures and ConfigurationsIEEE Transactions on Vehicular Technology, 2005
- Circuit topologies for single-phase voltage-doubler boost rectifiersIEEE Transactions on Power Electronics, 1993