Polarity dependence in Cl2-based plasma etching of GaN, AlGaN and AlN
Authors:
- Matthew D. SmithMSMatthew D. Smith
- Xu LiXLXu Li
- Michael J. UrenMUMichael J. Uren
- Iain G. ThayneITIain G. Thayne
- Martin KuballMKMartin Kuball
- 1 August 2020
- journal article
- research article
- Published by Elsevier in Applied Surface Science
- Vol. 521
Abstract
No abstract availableKeywords
Funding Information
- Engineering and Physical Sciences Research Council
This publication has 46 references indexed in Scilit:
- Electron transport in N-polar GaN-based heterostructuresApplied Physics Letters, 2019
- Fabrication technology for high light-extraction ultraviolet thin-film flip-chip (UV TFFC) LEDs grown on SiCSemiconductor Science and Technology, 2019
- A Comprehensive Review of Recent Progress on GaN High Electron Mobility Transistors: Devices, Fabrication and ReliabilityElectronics, 2018
- N-polar InGaN-based LEDs fabricated on sapphire via pulsed sputteringAPL Materials, 2017
- Schottky-barrier normally off GaN/InAlN/AlN/GaN HEMT with selectively etched access regionIEEE Electron Device Letters, 2013
- Simulation of Short-Channel Effects in N- and Ga-Polar AlGaN/GaN HEMTsIEEE Transactions on Electron Devices, 2011
- Very Low Ohmic Contact Resistance through an AlGaN Etch-Stop in Nitrogen-Polar GaN-Based High Electron Mobility TransistorsJapanese Journal of Applied Physics, 2010
- Nonselective etching of GaN/AlGaN heterostructures by Cl2/Ar/BCl3 inductively coupled plasmasScience China Technological Sciences, 2004
- Selective etching of GaN over AlN using an inductively coupled plasma and an O2/Cl2/Ar chemistryJournal of Vacuum Science & Technology A, 2000
- Inductively coupled plasma etching of GaN using Cl2/Ar and Cl2/N2 gasesJournal of Applied Physics, 1999