Optimization Scheme for 3D Printing of PLA–PHBV–PCL Biodegradable Blends for Use in Orthopedic Casting
Open Access
Abstract
Three-dimensional printing technology offers significant advantages in the production of orthopedic casts, providing a promising alternative to conventional plaster and fiberglass materials. Polylactic acid (PLA) is widely used for this purpose; however, its adoption is limited due to poor mechanical properties, including high brittleness, low thermal stability, and limited elongation. These challenges can be mitigated by blending PLA with other biodegradable polymers. This study investigated a blend of PLA with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a type of polyhydroxyalkanoate (PHA), and polycaprolactone (PCL) for the development of 3D printed orthopedic casts. The key mechanical properties—tensile strength, percent elongation at break, Young’s modulus, flexural strength, flexural modulus, and impact strength—were evaluated as a function of the printing parameters, including nozzle temperature, layer height, and raster angle. The grey relational analysis (GRA) approach was applied to optimize these mechanical properties. The optimal printing parameters were found to be a nozzle temperature of 180 °C, a layer height of 0.18 mm, and a raster angle of 0°, resulting in a tensile strength of 44.4 ± 4.4 MPa, an elongation at break of 68.5 ± 11.6%, a Young’s modulus of 948.7 ± 25.1 MPa, a flexural strength of 54.6 ± 8.9 MPa, a flexural modulus of 1549.3 ± 141 MPa, and an impact strength of 80.77 ± 5.6 J/m. Statistical analysis using analysis of variance (ANOVA) revealed that for tensile strength, 50.18% was influenced by the raster angle, 26.38% by the layer height, and 18.92% by the nozzle temperature; for flexural strength, 69.81% was influenced by the raster angle, 20.67% by the layer height, and 3.53% by the nozzle temperature; and for impact strength, 75.11% was influenced by the raster angle, 13.16% by the layer height, and 4.45% by the nozzle temperature.Keywords
Funding Information
- NSERC (401363)
This publication has 39 references indexed in Scilit:
- Enhancing Electrical and Magnetic Properties in SLA 3D Printed Resin Composites With Nano MWCNT, TiN, and c‐BN PowdersPolymers for Advanced Technologies, 2025
- State-of-the-art review on fused deposition modeling (FDM) for 3D printing of polymer blends and composites: innovations, challenges, and applicationsThe International Journal of Advanced Manufacturing Technology, 2024
- Effect of nanosized carbon nanotubes, Titanium Nitride and cubic Boron Nitride powders on mechanical and thermal properties of SLA 3D printed resin compositesPolymer Composites, 2024
- Integrated optimization scheme for 3D printing of PLA-APHA biodegradable blendsProgress in Additive Manufacturing, 2024
- Integrating resistance-based sensing into fused filament fabricated mechanical metamaterial structureProgress in Additive Manufacturing, 2024
- Optimization of 3D printed polylactic acid structures with different infill patterns using Taguchi-grey relational analysisAdvanced Industrial and Engineering Polymer Research, 2023
- Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printerThe International Journal of Advanced Manufacturing Technology, 2018
- Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printerAdvances in Manufacturing, 2018
- Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and OrientationJournal of Failure Analysis and Prevention, 2016
- ASTM D2562011