A Computational Fluid Dynamics Study of Laminar Forced Convection Improvement of a Non-Newtonian Hybrid Nanofluid within an Annular Pipe in Porous Media
Open Access
Abstract
Porous inserts and nanofluids are among the conventional methods for the amelioration of heat transfer in industrial systems. The heat transfer rate could also be improved by utilizing porous substances with a higher thermal conductivity in these systems. This research work presents a two-dimensional (2D) numerical examination of the laminar forced convection of an --carboxy methyl cellulose (CMC) non-Newtonian hybrid nanofluid within an annular pipe in a porous medium. The porous medium was inserted within two inner or outer wall cases. For hybrid nanofluid flow modeling in porous media, a Darcy–Brinkman–Forchheimer formulation was employed. Additionally, a power-law technique was utilized as a fluid viscosity model for the considered non-Newtonian fluid. The governing equations were discretized according to the finite volume method (FVM) using the computational fluid dynamics (CFD) software package ANSYS-FLUENT. The cylinder walls’ thermal boundary conditions were exposed to a constant heat flux. For various Darcy numbers, the impacts of different volume fractions of the hybrid nanofluid (0% to 5%), the total Nusselt number, the pressure drop, and the performance number (PN) were evaluated. The outcomes indicate that the heat transfer coefficient increases considerably with a decrease in the Darcy number ( to ), as well as with an increase in the porous thickness ratio. Moreover, it was found that the nanoparticles’ increased volume fraction would ameliorate the heat transfer and, more considerably, the PN factor. Furthermore, according to the outcomes in both cases I and II for a constant porous thickness ratio and Darcy number and a high volume fraction (), the maximum total Nusselt number reached 1274.44. Moreover, applying a volume fraction of 5% with and reached the highest value of the PN index equal to 7.61, which is augmented as roughly 88% compared to the case of a zero volume fraction.
Keywords
This publication has 39 references indexed in Scilit:
- Numerical investigation of flow characteristics, heat transfer and entropy generation of nanofluid flow inside an annular pipe partially or completely filled with porous media using two-phase mixture modelEnergy, 2015
- Thermal conductivity of Cu/TiO2–water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlationInternational Communications in Heat and Mass Transfer, 2015
- A numerical study of water based Al2O3 and Al2O3–Cu hybrid nanofluid effect on forced convective heat transferInternational Journal of Thermal Sciences, 2015
- A two-phase theoretical study of Al2O3–water nanofluid flow inside a concentric pipe with heat generation/absorptionInternational Journal of Thermal Sciences, 2014
- Flow of nanofluids through porous media: Preserving timber with colloid scienceColloids and Surfaces A: Physicochemical and Engineering Aspects, 2014
- Enhanced heat transfer and friction factor of MWCNT–Fe3O4/water hybrid nanofluidsInternational Communications in Heat and Mass Transfer, 2014
- Heat transfer and flow analysis for SA-TiO2 non-Newtonian nanofluid passing through the porous media between two coaxial cylindersJournal of Molecular Liquids, 2013
- Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamicsInternational Communications in Heat and Mass Transfer, 2012
- Numerical investigation of laminar nanofluid developing flow and heat transfer in a circular channelApplied Thermal Engineering, 2012
- Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical propertiesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2011