An Optimal Model for Determination Shut-In Time Post-Hydraulic Fracturing of Shale Gas Wells: Model, Validation, and Application
Open Access
Abstract
The global shale gas resources are huge and have good development prospects, but shale is mainly composed of nanoscale pores, which have the characteristics of low porosity and low permeability. Horizontal drilling and volume fracturing techniques have become the effective means for developing the shale reservoirs. However, a large amount of mining data indicate that the fracturing fluid trapped in the reservoir will inevitably cause hydration interaction between water and rock. On the one hand, the intrusion of fracturing fluid into the formation causes cracks to expand, which is conducive to the formation of complex fracture networks; on the other hand, the intrusion of fracturing fluid into the formation causes the volume expansion of clay minerals, resulting in liquid-phase trap damage. At present, the determination of well closure time is mainly based on experience without theoretical guidance. Therefore, how to effectively play the positive role of shale hydration while minimizing its negative effects is the key to optimizing the well closure time after fracturing. This paper first analyzes the shale pore characteristics of organic pores, clay pores, and brittle mineral pores, and the multi-pore self-absorption model of shale is established. Then, combined with the distribution characteristics of shale hydraulic fracturing fluid in the reservoir, the calculation model of backflow rate and shut-in time is established. Finally, the model is validated and applied with an experiment and example well. The research results show that the self-imbibition rate increases with the increase in self-imbibition time, and the flowback rate decreases with the increase in self-imbibition time. The self-imbibition of slick water is the maximum, the self-imbibition of breaking fluid is the minimum, and the self-imbibition of mixed fluid is the middle, and the backflow rates of these three liquids are in reverse order. It is recommended the shut-in time of Longmaxi Formation shale is 17 days according to the hydration and infiltration model.Keywords
Funding Information
- National Natural Science Foundation of China (51525404)
This publication has 37 references indexed in Scilit:
- Impact of rock fabric on water imbibition and salt diffusion in gas shalesInternational Journal of Coal Geology, 2015
- A Critical Review of Hydraulic-Fracturing Fluids for Moderate- to Ultralow-Permeability Formations Over the Last DecadeSPE Production & Operations, 2014
- Imbibition and Water Blockage In Unconventional Reservoirs: Well-Management Implications During Flowback and Early ProductionSPE Reservoir Evaluation & Engineering, 2014
- Displacement of water by gas in propped fractures: Combined effects of gravity, surface tension, and wettabilityJournal of Unconventional Oil and Gas Resources, 2014
- Spontaneous Imbibition of Brine and Oil in Gas Shales: Effect of Water Adsorption and Resulting MicrofracturesEnergy & Fuels, 2013
- Specific surface area and pore‐size distribution in clays and shalesGeophysical Prospecting, 2013
- Water Use for Shale-Gas Production in Texas, U.S.Environmental Science & Technology, 2012
- The Next Opportunity To Improve Hydraulic-Fracture StimulationJournal of Petroleum Technology, 2012
- Impact of Water Dynamics in Fractures on the Performance of Hydraulically Fractured Wells in Gas-Shale ReservoirsJournal of Canadian Petroleum Technology, 2012
- Experimental Investigation of Shale Membrane Behavior Under Tri-Axial ConditionPetroleum Science and Technology, 2005