JTJinchi Teng

Jinchi Teng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinchi Teng has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Large Scale Physical Modeling of Shale Fracture Propagation Under Different Controllable Shock Wave and Perforation Operation Schemes

    by Bobo Xie, Jingchen Zhang, Xi Chen, Yajun Zhang, Jiawen Li, Qiuguo Li, Jinchi Teng, Jing Guo

    To address the relatively high near-wellbore fracture-initiation resistance and the tendency of hydraulic fractures to propagate along a dominant path under conventional perforation-based hydraulic fracturing, three large-scale hydraulic-fracturing experiments were conducted using a 10,000-ton ultra-large true-triaxial hydraulic-fracturing physical simulation system to investigate the effects of different controllable shock-wave–perforation operation schemes on shale fracture initiation and propagation. Natural shale outcrop blocks from the Jimsar shale oil reservoir, each measuring 2.0 m × 2.0 m × 1.0 m, were used. Three operation schemes were investigated: conventional perforation–hydraulic fracturing, shock wave–perforation–hydraulic fracturing, and perforation–shock wave–hydraulic fracturing. Post-fracturing fracture observations, three-dimensional fracture reconstruction, and wellhead-pressure responses were jointly analyzed to characterize fracture initiation and propagation under the different operation schemes. The results showed that, under conventional perforation–hydraulic fracturing, fracture propagation was dominated by a principal fracture, with only limited secondary fractures, and the wellhead breakdown pressure reached 21.2 MPa. After breakdown, the pressure remained at a relatively high level and exhibited sustained fluctuations, indicating large and continuously varying fracture-propagation resistance. When one 100 kJ shock was applied before perforation, several large-scale dominant fracture surfaces developed, and the breakdown pressure decreased to 6.6 MPa, representing a reduction of 68.9% relative to the conventional case. The post-breakdown pressure gradually stabilized, indicating reduced variation in fracture-propagation resistance. When two successive 100 kJ shocks were applied after perforation, fractures propagated in multiple directions with more pronounced bending, deflection, and branching. The breakdown pressure further decreased to 4.6 MPa, 78.3% lower than that of the conventional case. Fractures continued to propagate under relatively low pressure, followed by a late-stage pressure increase. The dynamic disturbance induced by controllable shock waves altered the near-wellbore stress distribution and rock-failure conditions, reduced hydraulic-fracture initiation resistance, and modified subsequent fracture-propagation paths. These results reveal the coupled mechanism of near-wellbore stress redistribution and dynamic fracture propagation induced by controllable shock-wave–perforation operations, and provide experimental support for fracture-initiation control and optimization of integrated stimulation parameters in the Jimsar shale oil reservoir.


  • Open Access

    Hydraulic Fracture Propagation in Three Meter-Scale Reconstituted Tight Conglomerate Specimens Under Different Formulation Conditions

    by Jingfeng Dong, Jingchen Zhang, Bobo Xie, Linjie Wang, Xiaowei Wang, Xiaodong Guo, Jinchi Teng, Jiawen Li

    A tight conglomerate is mechanically heterogeneous because gravel particles, the matrix, and their contacts can perturb hydraulic-fracture paths. This study presents an exploratory comparison of three 2.0 m × 2.0 m × 1.0 m reconstituted conglomerate specimens, identified as specimen 97 (Condition A), specimen 98 (Condition B), and specimen 99 (Condition C). One meter-scale specimen was tested under each formulation condition using the same applied boundary stresses, nominal pumping rate, and fluid viscosity. Post-fracturing surface observations, inlet-pressure histories, and laboratory acoustic-emission (AE) event locations were examined. After event-quality control, DBSCAN-based spatial filtering was performed in Z-score-standardized coordinates, and three-dimensional alpha shapes were constructed from the retained event coordinates in meters to calculate geometric AE-event-envelope volumes. The external surface-fracture traces were more spatially distributed in specimen 97 and more localized in specimen 99. The available DBSCAN–alpha-shape calculation outputs yielded geometric AE-event-envelope volumes of 0.2832, 0.2460, and 0.0937 m3 for specimens 97, 98, and 99, respectively. Because only one specimen was tested under each condition, the specimen formulations and gravel characteristics were not identical, the gravel–matrix interfacial properties were not measured directly, and the pumping histories differed, the observations were interpreted as descriptive case differences rather than as a statistically validated single-factor relationship.


  • Open Access

    An Optimal Model for Determination Shut-In Time Post-Hydraulic Fracturing of Shale Gas Wells: Model, Validation, and Application

    by Jianmin Li, Gang Tian, Xi Chen, Bobo Xie, Xin Zhang, Jinchi Teng, Zhihong Zhao, Haozeng Jin

    The global shale gas resources are huge and have good development prospects, but shale is mainly composed of nanoscale pores, which have the characteristics of low porosity and low permeability. Horizontal drilling and volume fracturing techniques have become the effective means for developing the shale reservoirs. However, a large amount of mining data indicate that the fracturing fluid trapped in the reservoir will inevitably cause hydration interaction between water and rock. On the one hand, the intrusion of fracturing fluid into the formation causes cracks to expand, which is conducive to the formation of complex fracture networks; on the other hand, the intrusion of fracturing fluid into the formation causes the volume expansion of clay minerals, resulting in liquid-phase trap damage. At present, the determination of well closure time is mainly based on experience without theoretical guidance. Therefore, how to effectively play the positive role of shale hydration while minimizing its negative effects is the key to optimizing the well closure time after fracturing. This paper first analyzes the shale pore characteristics of organic pores, clay pores, and brittle mineral pores, and the multi-pore self-absorption model of shale is established. Then, combined with the distribution characteristics of shale hydraulic fracturing fluid in the reservoir, the calculation model of backflow rate and shut-in time is established. Finally, the model is validated and applied with an experiment and example well. The research results show that the self-imbibition rate increases with the increase in self-imbibition time, and the flowback rate decreases with the increase in self-imbibition time. The self-imbibition of slick water is the maximum, the self-imbibition of breaking fluid is the minimum, and the self-imbibition of mixed fluid is the middle, and the backflow rates of these three liquids are in reverse order. It is recommended the shut-in time of Longmaxi Formation shale is 17 days according to the hydration and infiltration model.