Influence of Welding Parameters on Weld Timings, Temperature Variation and Mechanical Strength of Friction Stir Welded AA6061 and AA6082 Alloy
Authors:
Open Access
- 22 July 2024
- journal article
- Published by Informatics Publishing Limited in Journal of Mines, Metals and Fuels
- p. 347-355
Abstract
Friction stir welding is a type of welding that creates friction using a stirring tool while the work-pieces are held together in the welding joint configuration. Friction stir welding is a solid-state welding process. It is one of the efficient ways of joining technology of materials. The friction forces at a microscopic level to change the inner structure of metal properties and it is done by using the kinetic energy of friction in welding methods. This work is majorly carried out to optimize the process parameters like tool rotational speed, Feed, ultimate tensile strength of friction stir welded joint on AA6061 and AA6082 alloy. Welding speed and temperature variation in the workpiece during the welding is recorded for different trials. Failure analysis was carried out for different fractured surfaces by using Scanning Electron Microscope (SEM) revels ductile fracture due to micro void coalescence. The maximum ultimate tensile strength was at a speed of 900 rpm, feed 31.5 mm/min indicates high joint efficiency. Welding speed is more at the feed 90mm/min. Maximum rise in the temperature is at speed 2000 rpm and feed 90 mm/min.Keywords
This publication has 24 references indexed in Scilit:
- Influence of tool tilt angle on heat transfer and material flow in friction stir weldingJournal of Manufacturing Processes, 2020
- A detailed process design for conventional friction stir welding of aluminum alloys and an overview of related knowledgeEngineering Reports, 2020
- Tool rotational speed impact on temperature variations, mechanical properties and microstructure of friction stir welding of dissimilar high-strength aluminium alloysJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
- Aluminum alloys in marine construction: characteristics, application, and problems from a fabrication viewpointMarine Systems & Ocean Technology, 2019
- Friction stir welding of aluminum 6061-T6 in presence of watercooling: Analyzing mechanical properties and residual stress distributionInternational Journal of Lightweight Materials and Manufacture, 2019
- Effect of precipitation hardening heat treatment on mechanical and microstructure features of dissimilar friction stir welded AA2024-T6 and AA6061-T6 alloysJournal of Manufacturing Processes, 2018
- Inhomogeneity of microstructure and mechanical properties in the nugget of friction stir welded thick 7075 aluminum alloy jointsJournal of Materials Science & Technology, 2018
- A new approach for manufacturing copper-clad aluminum bimetallic tubes by friction stir welding (FSW)Journal of Manufacturing Processes, 2017
- Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir weldsJournal of Alloys and Compounds, 2017
- Mathematical model and optimization for underwater friction stir welding of a heat-treatable aluminum alloyMaterials & Design (1980-2015), 2013