Fixed-Switching-Frequency Background Capacitor-Current-Sensor Calibration for DC–DC Converters
- 20 August 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (5) , 1504-1516
Abstract
Background capacitor-current-sensor (CCS) calibration (CAL) is proposed for dc–dc converters to achieve fast load-transient response for small undershoot $V_{\mathrm {US}}$ , overshoot $V_{\mathrm {OS}}$ , and short settling time $t_{\mathrm {S}}$ in the output voltage $V_{\mathrm {O}}$ . The CCS’ impedance $Z_{\mathrm {Cs}}$ is calibrated to a scaled replica of the output capacitor’s impedance $Z_{\mathrm {Co}}$ , which varies with printed-circuit-board parasitics, process-voltage-temperature variations, and aging. Thus, the CCS shunts a current $I_{\mathrm {Cs}}$ equal to a scaled output-capacitor current $I_{\mathrm {Co}}$ , which instantly and accurately reflects load-current $I_{\mathrm {load}}$ transients. The CAL operates at a fixed switching frequency $f_{\mathrm {SW}}$ . At this $f_{\mathrm {SW}}$ , although $Z_{\mathrm {Cs}}$ is dominated by its inductive part, this work can still calibrate its capacitive and resistive parts based on the time derivatives dV O / dt and dI Cs / dt , respectively. This fixed- $f_{\mathrm {SW}}$ CAL overcomes the bottleneck of the prior state-of-the-art CCS CAL, which must hop $f_{\mathrm {SW}}$ to lower values to calibrate $Z_{\mathrm {Cs}}$ capacitive and resistive parts, thereby enlarging $V_{\mathrm {O}}$ steady-state ripples and transient fluctuations during CAL. Thus, only this fixed- $f_{\mathrm {SW}}$ CAL is suitable for background operation. Moreover, this CAL can be interrupted by a load-transient or dynamic-voltage-scaling event and be reactivated in quasi-steady state. The shortest CAL period is 8.8 $\mu \text{s}$ at $f_{\mathrm {SW}} = 30$ MHz without interruption. A buck converter with this CCS CAL is fabricated in 0.18- $\mu \text{m}$ CMOS process and occupies 2.25 mm 2 . Under a 2-A/4-ns step-up (step-down) load transient, the measured $V_{\mathrm {US}}$ ( $V_{\mathrm {OS}}$ ) and $t_{\mathrm {S}}$ are 36 mV (29 mV) and 56 ns (45 ns), respectively. Compared with prior state of the arts, this work achieves much smaller $V_{\mathrm {O}}$ ripples and fluctuations during CAL, shorter CAL period, and faster load-transient response.Keywords
Funding Information
- Ministry of Science and Technology (MOST) of Taiwan
- Hierarchical Green-Energy Materials (Hi-GEM) Research Center, National Cheng Kung University
This publication has 18 references indexed in Scilit:
- A Wide Dynamic Range Buck Converter With Sub-nW Quiescent PowerIEEE Journal of Solid-State Circuits, 2017
- A 6 A, 93% Peak Efficiency, 4-Phase Digitally Synchronized Hysteretic Buck Converter With ±1.5% Frequency and ±3.6% Current-Sharing ErrorIEEE Journal of Solid-State Circuits, 2017
- A Design of a 92.4% Efficiency Triple Mode Control DC–DC Buck Converter With Low Power Retention Mode and Adaptive Zero Current Detector for IoT/Wearable ApplicationsIEEE Transactions on Power Electronics, 2016
- A 2 MHz 12–100 V 90% Efficiency Self-Balancing ZVS Reconfigurable Three-Level DC-DC Regulator With Constant-Frequency Adaptive-On-Time $V^{2}$ Control and Nanosecond-Scale ZVS Turn-On DelayIEEE Journal of Solid-State Circuits, 2016
- A 50 nW-to-10 mW Output Power Tri-Mode Digital Buck Converter With Self-Tracking Zero Current Detection for Photovoltaic Energy HarvestingIEEE Journal of Solid-State Circuits, 2016
- A Monolithic Capacitor-Current-Controlled Hysteretic Buck Converter With Transient-Optimized Feedback CircuitIEEE Journal of Solid-State Circuits, 2015
- Single-Inductor Quad-Output Switching Converter With Priority-Scheduled Program for Fast Transient Response and Unlimited Load Range in 40 nm CMOS TechnologyIEEE Journal of Solid-State Circuits, 2015
- High Frequency Buck Converter Design Using Time-Based Control TechniquesIEEE Journal of Solid-State Circuits, 2014
- 4.1 A 3-phase digitally controlled DC-DC converter with 88% ripple reduced 1-cycle phase adding/dropping scheme and 28% power saving CT/DT hybrid current control2014
- Miniaturized BJT-Based Thermal Sensor for Microprocessors in 32- and 22-nm TechnologiesIEEE Journal of Solid-State Circuits, 2013