Thermal behaviour of inorganic aluminosilicate polymer based on cement kiln dust
Open Access
- 1 June 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 379 (1) , 012008
Abstract
Alkali activated materials have shown potential for use in high temperature applications. This paper deals with thermal behaviour of various inorganic polymer formulations, which were prepared by mixing metakaolin, blast furnace slag, fly ash and cement kiln dust as alkaline activator. The cement kiln dust was added in the amount of 10 wt.%. The influence of thermal treatment ranging from 30 to 1000°C on the following characteristics was evaluated: compressive strength, thermal expansion, weight loss, melting point, morphology changes and dehydration. The thermal behaviour was studied by TG-DTA analysis, dilatometry and heating microscope, XRD analysis was used to examine phase changes. All measurements were conducted on samples after 28 days of curing time.Keywords
This publication has 20 references indexed in Scilit:
- Characterisation and properties of geopolymer composite part 1: Role of mullite reinforcementCeramics International, 2017
- Properties of soil–bentonite–cement bypass mixture for cutoff wallsConstruction and Building Materials, 2015
- Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricksConstruction and Building Materials, 2013
- Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slagsCement and Concrete Research, 2011
- Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful productsJournal of Hazardous Materials, 2007
- The influence of calcium content on the structure and thermal performance of fly ash based geopolymersJournal of Materials Science, 2006
- Effect of copper slag and cement by-pass dust addition on mechanical properties of concreteConstruction and Building Materials, 2006
- Alkali-activated binders by use of industrial by-productsCement and Concrete Research, 2005
- Effects of curing temperature and NaOH addition on hydration and strength development of clinker-free CKD-fly ash bindersCement and Concrete Research, 2004
- Hydration and properties of novel blended cements based on cement kiln dust and blast furnace slagCement and Concrete Research, 2003