Evaluation of Thick-Lift Paving of Asphalt Concrete
Open Access
- 2 August 2024
- journal article
- research article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2679 (1) , 1516-1530
Abstract
This research paper focuses on the feasibility of thick-lift paving with asphalt concrete. Thick-lift paving is the placement of asphalt concrete in a lift greater than the allowable maximum by an agency, often four to five times the nominal maximum aggregate size. Thick-lift paving offers potential benefits including streamlining operations and eliminating the bond interface in multi-lift layers. However, it also presents challenges such as potential for inadequate compaction and lower ride quality. Asphalt concrete design and construction specifications from 19 state Departments of Transportation were reviewed. In the field, 28 thick-paving test sections were constructed with different lift thicknesses (3 to 10 in.), two mix designs, different paving screed settings, and different rolling patterns. All pavers were equipped with tamper bar screeds. During construction, the researchers monitored asphalt cooldown time and mat density. After construction, the ride quality of each section was measured, and cores were tested for air voids content. Acceptable mat compaction was achieved in all test sections, with additional roller passes having the most significant effect on compaction. The study also found that thick one-lift layers yielded better and more uniform compaction than two-lift layers. Thicker lifts had significantly longer cool down times and potentially increased roughness. Recommendations included the possible use of tamper bar screeds and additional roller passes to improve compaction. Scenarios that are suitable for thick-lift paving were identified.Keywords
This publication has 3 references indexed in Scilit:
- The effect of lift thickness on permeability and the time available for compaction of hot mix asphalt pavement under tropical climate conditionConstruction and Building Materials, 2013
- Effect of Fine Aggregate Angularity on Compaction and Shearing Resistance of Asphalt MixturesTransportation Research Record: Journal of the Transportation Research Board, 2002
- Calcool: A multi-layer Asphalt Pavement Cooling Tool for Temperature Prediction During ConstructionInternational Journal of Pavement Engineering, 2001