DGDarlene Goehl

Darlene Goehl

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Darlene Goehl has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Assessment of Wicking Geotextiles for Enhanced Drainage and Reinforcement in Flood-Prone Coastal Highway Slopes

    by Puneet Bhaskar, Jaime Suarez, Darlene Goehl, Anand J. Puppala

    Flooding significantly compromises coastal transportation infrastructure by increasing the risk of slope failures and causing substantial damage. Rapid escalation in the severity and occurrence of flooding highlights the need to develop techniques for effective water drainage within slopes to ensure their safety and durability. Over the past decade, the multifunctional wicking geotextile has gained popularity in geotechnical infrastructure design. Its enhanced moisture redistribution capabilities, facilitated by wicking action, enable it to effectively drain accumulated water within geomaterials. Although wicking geotextiles have demonstrated promising results in pavement applications, their performance in highway embankment slopes remains largely unexplored. This project aims to evaluate the effectiveness of wicking geotextiles as a solution for coastal infrastructure susceptible to flooding. The research focuses on understanding the effect of flooding and drainage on the interface strength of wicking geotextile, a crucial parameter in the design of reinforced slopes. A large-scale direct shear box was used to conduct interface tests with wicking geotextile. Tests were performed immediately after flooding and after 7 days to capture the effects of wicking-induced drainage on interface strength properties. The drainage capability of wicking geotextile was also evaluated at different normal stress levels. Additionally, a finite element model was developed, and numerical analyses were conducted to examine effect of interface strength properties of wicking geotextile on safety factors of the slope subjected to flooding. Results from experimental and numerical studies indicate that wicking geotextile has potential to improve the stability of slopes vulnerable to flooding.

  • Open Access

    Evaluation of Thick-Lift Paving of Asphalt Concrete

    by Bryan Wilson, Moises Saca, Darlene Goehl

    This research paper focuses on the feasibility of thick-lift paving with asphalt concrete. Thick-lift paving is the placement of asphalt concrete in a lift greater than the allowable maximum by an agency, often four to five times the nominal maximum aggregate size. Thick-lift paving offers potential benefits including streamlining operations and eliminating the bond interface in multi-lift layers. However, it also presents challenges such as potential for inadequate compaction and lower ride quality. Asphalt concrete design and construction specifications from 19 state Departments of Transportation were reviewed. In the field, 28 thick-paving test sections were constructed with different lift thicknesses (3 to 10 in.), two mix designs, different paving screed settings, and different rolling patterns. All pavers were equipped with tamper bar screeds. During construction, the researchers monitored asphalt cooldown time and mat density. After construction, the ride quality of each section was measured, and cores were tested for air voids content. Acceptable mat compaction was achieved in all test sections, with additional roller passes having the most significant effect on compaction. The study also found that thick one-lift layers yielded better and more uniform compaction than two-lift layers. Thicker lifts had significantly longer cool down times and potentially increased roughness. Recommendations included the possible use of tamper bar screeds and additional roller passes to improve compaction. Scenarios that are suitable for thick-lift paving were identified.


  • Alternative Contracting Methods: Modeling and Assessing the Effects of Contract Type on Time-Cost-Change Performance

    by Kunhee Choi, Yangtian Yin, Darlene Goehl, H. David Jeong

    Although the use of alternative contracting methods (ACMs) has become increasingly common, little is known about their effects on a project’s time-cost-change performance. This study draws from 2,572 project datapoints, addressing this research gap by plotting, analyzing, and validating high confidence performance indicators. The effects of different ACMs on project time, cost, and change performance were all evaluated and time-cost performance prediction models developed and tested. The results reveal that the use of incentives/disincentives is preferable for reducing the duration of a project. Lump-sum contracting is an effective choice for onbudget project delivery, while cost-plus-time bidding is significantly less effective than incentives/disincentives and no-excuse bonus contracting. Notably, the results also convey that ACMs with large project sizes are more prone to schedule delays and cost overruns. The robustness of the predictive models was verified by a predicted error sum of squares validation. The findings of this study will help state transportation agencies make better-informed decisions by providing foresight regarding the pros and cons of ACMs for aspects of project time-cost-change performance. The use of the predictive models will also assist agencies in justifying the probable time-cost impact of project change orders, enabling them to conduct more reliable risk assessments and develop more realistic contingency plans in the project scoping phase.