Effect of Nanoscale ZrC Addition on the Microstructure and Mechanical Properties of Laser-Welded Molybdenum Alloy Joints
Authors:
- Qinhao XuQXQinhao Xu
- Miaoxia XieMXMiaoxia Xie
- Jie NingJNJie Ning
- Long ZhangLZLong Zhang
- Zhang Lin JieZJZhang Lin Jie
- Sudheer Kumar PolamuriSPSudheer Kumar Polamuri
Preprint
- 16 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Molybdenum (Mo) alloys are critical for next-generation nuclear applications, yet their engineering utility is hindered by the "weldability-brittleness" paradox caused by grain coarsening and interstitial oxygen segregation. This study proposes an active grain-boundary engineering (GBE) strategy by incorporating nanoscale ZrC into laser-welded 0.45wt.% La2O3-strengthened Mo joints. Thermodynamic analysis and experimental results demonstrate that ZrC acts as a potent chemical buffer, scavenging detrimental oxygen to form stable ZrO2 and reducing grain-boundary MoO2 concentrations from 0.4% to 0.1%. Simultaneously, the nanoscale ZrC and in-situ ZrO2 particles facilitate heterogeneous nucleation and Zener pinning, yielding a 17.2% reduction in fusion zone (FZ) grain size. Consequently, the ZrC-modified joints achieved a peak room-temperature tensile strength of 449.7 MPa—a 12-fold increase over unmodified specimens (33.8 MPa)—while retaining 75.7% of the base metal strength at 1100°C. Fractographic analysis reveals a fundamental transition from catastrophic intergranular decohesion to transgranular cleavage, signifying a significant restoration of grain boundary cohesive strength. This study provides a robust technical framework for enhancing the joint integrity of refractory metals via targeted nanophase intervention.Keywords
This publication has 13 references indexed in Scilit:
- Trends and challenges in resistance brazing for starter motors: a comprehensive review with an industrial case studyWelding in the World, 2026
- A statistical assessment of the laser energy absorption and keyhole stability in high-power laser weldingJournal of Manufacturing Processes, 2025
- Uncovering the weakening mechanism of electron beam welded joints of La2O3 dispersion strengthened molybdenum alloy: Experiment and simulationMaterials Letters, 2022
- Grain refinement mechanisms of alloying molybdenum with carbon manufactured by laser powder bed fusionMaterials & Design, 2022
- Improvement in the weldability of molybdenum alloy by pre-welding solid carburisingJournal of Materials Science & Technology, 2021
- Designing of a thin Mo diffusion barrier towards strong and reliable Ti/Cu dissimilar brazingMaterials Science and Engineering: A, 2020
- Microstructure and mechanical properties of Mo-ZrC-Cu composites synthesized by reactive melt infiltration of Zr-Cu melt into porous Mo2C preforms at 1300 °CMaterials Chemistry and Physics, 2018
- Accident tolerant fuel cladding development: Promise, status, and challengesJournal of Nuclear Materials, 2018
- Joining of molybdenum and its applicationInternational Journal of Refractory Metals and Hard Materials, 2010
- Effect of carbon on the ductilisation of electron-beam welds in molybdenumJournal of Nuclear Materials, 1981