High-Frequency High-Density Bidirectional EV Charger
Authors:
- 1 June 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 687-694
Abstract
Due to the rapid adoption of Electric Vehicles (EVs) worldwide, On-Board/Off-Board Battery Chargers are facing numerous. One challenge is charging time since petrol and diesel vehicles are charged 10 times faster than electric vehicles. A second challenge is power density especially for the on-board chargers where minimal space for installation is allocated inside the vehicles. Another challenge is the wide battery voltage range which makes it difficult to optimize the converter over the entire battery voltage range and efficiency drops when either the battery voltage is too high or too lo.. Finally, the bi-directional operation is a challenge to allow the EV to support the grid in peak periods or even standalone loads. In this paper, a 6.6 kW two-stage structure is proposed utilizing a variable dc-link voltage operation. One of the most promising challenges in high-power applications is implementing the magnetics component into Printed Circuit Boards (PCBs). PCB winding transformers are widely in use in low power applications. Compared with conventional Iitz-wire transformers, the manufacturing process is greatly simplified and the parasitic is easier to control. However, due to the limitation of high winding loss and high multi-layer PCB cost in high power applications, the transformer design with PCB winding becomes a challenge. Emerging wide-bandgap devices provide the opportunity to adopt PCB transformers into high power applications. In addition, the low inductance requirement brought by high frequency also makes possible the realization of magnetic integration in PCB transformers.Keywords
This publication has 14 references indexed in Scilit:
- Power-Loss Analysis and Efficiency Maximization of a Silicon-Carbide MOSFET-Based Three-Phase 10-kW Bidirectional EV Charger Using Variable-DC-Bus ControlIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Over 300kHz GaN device based resonant bidirectional DCDC converter with integrated magnetics2016
- Evaluation and applications of 600V/650V enhancement-mode GaN devices2015
- Control of SiC-based dual active bridge in high power three phase on-board charger of EVs2015
- Avoiding Si MOSFET Avalanche and Achieving Zero-Voltage Switching for Cascode GaN DevicesIEEE Transactions on Power Electronics, 2015
- Design and evaluation of GaN-based dual-phase interleaved MHz critical mode PFC converter2014
- A new core loss model for rectangular AC voltages2014
- A Closer Look at the BREAST-Q©Clinics in Plastic Surgery, 2013
- An automotive on-board 3.3 kW battery charger for PHEV application2011
- Effects of eddy currents in transformer windingsProceedings of the Institution of Electrical Engineers, 1966