An Investigation of a Multi-Injector, Premix/Micromix Burner Burning Pure Methane to Pure Hydrogen
- 29 January 2025
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (7) , 1-11
Abstract
Micromix combustion technology has been identified as a promising strategy to mitigate the risks associated with burning high-hydrogen-content fuels. This technology has recently been introduced in premixed injector designs to develop burners with broader fuel flexibility, allowing the combustion of fuels ranging from natural gas, or currently available hydrocarbons, to pure hydrogen by controlling the micromix fuel ratio (MFR). Modifying this additional operating parameter can lead to premixed, partially premixed, and micromixed combustion, each having different stability mechanisms. The combustion characteristics of such flames in an industrial combustion environment with hundreds of injectors are unknown. A multi-injector configuration, consisting of five (5) injectors placed in a cross pattern, is used to investigate the combustion of pure methane to pure hydrogen, and different blends. Stability and combustion dynamic maps are first obtained at atmospheric temperature and pressure for fuel-lean mixtures of H2/CH4 ranging from 0/100%, 70/30%, 90/10%, to 100/0%, by volume. For each fuel mixture, the equivalence ratio is adjusted to maintain the same adiabatic flame temperature throughout the experiments. An increase in blowoff (BO) limit is observed for the multi-injector array compared to a single nozzle, while flashback occurs more rapidly for dominantly premixed conditions with high-hydrogen-content fuel. In addition to extending the flashback limit, micromixed flames are generally quieter for high-hydrogen-content fuels. Laser diagnostics are performed on selected operating conditions with hydrogen content of 0%, 30%, 50%, 70%, 90%, and 100%. Eight cases are investigated in this work at a constant bulk inlet velocity to highlight the impact of hydrogen content and MFR on the flame shape. Two-dimensional (2D) particle image velocimetry (PIV), OH and acetone planar laser-induced fluorescence (PLIF), as well as acoustic measurements are performed simultaneously. The planar measurements show that the OH-PLIF signal becomes thinner and nonaxisymmetric as MFR is increased from 0% to 100%, with the flames gradually transitioning from V-shaped to M-shaped, before stabilizing as jet flames in crossflow.Keywords
Funding Information
- Government of Canada (Environment and Climate Change Canada)
- National Research Council Canada (Low-Emission Aviation Program)
- Natural Sciences and Engineering Research Council of Canada (N/A)
- Siemens (Siemens Energy Canada Limited)
This publication has 17 references indexed in Scilit:
- Combustion dynamics of multi-element lean-premixed hydrogen-air flame ensembleCombustion and Flame, 2021
- Experimental investigation of combustion dynamics and NOx/CO emissions from densely distributed lean-premixed multinozzle CH4/C3H8/H2/air flamesCombustion and Flame, 2021
- Flame stabilization mechanisms and shape transitions in a 3D printed, hydrogen enriched, methane/air low-swirl burnerInternational Journal of Hydrogen Energy, 2021
- Hydrogen energy, economy and storage: Review and recommendationInternational Journal of Hydrogen Energy, 2019
- An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applicationsInternational Journal of Hydrogen Energy, 2019
- Development and Testing of a Low NOx Hydrogen Combustion System for Heavy-Duty Gas TurbinesJournal of Engineering for Gas Turbines and Power, 2013
- Hydrogen as an energy carrier: Prospects and challengesRenewable and Sustainable Energy Reviews, 2012
- Visible emission of hydrogen flamesCombustion and Flame, 2009
- Tracer-LIF diagnostics: quantitative measurement of fuel concentration, temperature and fuel/air ratio in practical combustion systemsProgress in Energy and Combustion Science, 2005
- Combustion dynamics and control: Progress and challengesProceedings of the Combustion Institute, 2002