Extraction of Caprolactam with Toluene in a Pulsed Disc and Doughnut Column–Part III: Mass Transfer Characteristics
- 1 August 2006
- journal article
- research article
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 24 (4) , 539-564
Abstract
The mass transfer characteristics of a pulsed disc and doughnut column with a 0.04 m internal diameter and 4.24 m active column length are investigated in order to evaluate its contacting efficiency for caprolactam extraction with toluene. Pilot plant experiments for both the forward and back‐extraction process were performed in order to determine the concentration profile along the column length in both the extract and raffinate phase as a function of the operating conditions. The experimental conditions covered the industrial operating range. Furthermore the dispersed phase hold‐up, average droplet diameter and operating regime were determined and compared with the results obtained for the equilibrium situation, as discussed in Part II. In the forward extraction process a significant influence of operating conditions was observed, where an increase in the flux decreased the separation efficiency, but an increase in pulsation intensity, temperature, or the addition of ammonium sulphate increased the separation efficiency. In the back‐extraction all concentration profiles were comparable and all caprolactam was extracted after a column length of L/m=2. Compared to the equilibrium situation the drop diameter and pulsation intensity required for the transition of the mixer‐settler to the dispersion operating regime were found to increase under mass transfer conditions, while the hold‐up decreased. HETS values were determined for both the forward and back‐extraction. For the latter HETS=0.28 to 0.41, whereas in the forward extraction HETS=0.32 to 0.67. The concentration profiles were described with the backflow model, using a constant backflow parameter for the continuous phase and a constant overall mass transfer coefficient. The interfacial area was correlated using drop diameter and hold‐up expressions derived for the equilibrium situation, taking into account the relative effect of mass transfer. Using these expressions the measured data could be correlated and described well.Keywords
This publication has 17 references indexed in Scilit:
- Residence time distribution of droplets within discs and doughnuts pulsed extraction columns via Lagrangian experiments and simulationsChemical Engineering Journal, 2003
- Lagrangian simulations contribution to the knowledge of discs and doughnuts pulsed solvent extraction columns hydrodynamicsChemical Engineering and Processing - Process Intensification, 2003
- CFD Contribution to a Design Procedure for Discs and Doughnuts Extraction ColumnsChemical Engineering Research and Design, 1998
- Current and Potential Developments in Methods for the Scale-Up and Design of Column ExtractorsMineral Processing and Extractive Metallurgy Review, 1998
- Maxwell-Stefan approach coupled drop population model for the dynamic simulation of liquid-liquid extraction pulsed columnComputers & Chemical Engineering, 1998
- Caprolactam production: A comparison of different layouts of the liquid-liquid extraction sectionChemical Engineering & Technology, 1997
- Numerical experimentation: a tool to calculate the axial dispersion coefficient in discs and doughnuts pulsed solvent extraction columnsChemical Engineering Science, 1997
- Unified Correlations for the Prediction of Drop Size in Liquid−Liquid Extraction ColumnsIndustrial & Engineering Chemistry Research, 1996
- A Unified Correlation for the Prediction of Dispersed-Phase Hold-Up in Liquid-Liquid Extraction ColumnsIndustrial & Engineering Chemistry Research, 1995
- Simulation of hydrodynamics and mass transfer of disks and rings pulsed columnIndustrial & Engineering Chemistry Research, 1988