Estimation of the three-dimensional permeability tensor of engineering textiles using artificial neural networks
- 23 December 2025
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 60 (27) , 2507-2524
Abstract
The permeability quantifies the conductance of a textile as a porous medium for liquid flow and is an important material property for the liquid composite moulding (LCM) process. There are many different systems to measure and determine the permeability. The advantage of systems based on 3-dimensional flow progression is that the permeability tensor can be determined with one single measurement. However, derivation of the permeability values from the experimental data can be complex, especially when the flow front reaches the cavity walls and no analytical solution is available. In this study, a new artificial-intelligence-based evaluation method is presented for this case. An artificial neural network (ANN) is trained and tested with data from finite volume method (FVM) simulations. Different architectures and training data are used to evaluate the influences on the quality of the permeability estimation. With a minimum of 345 training data sets, a mean absolute percentage error (MAPE) of approx. 2.57 % was achieved during the training. The training can be further improved, when the simulation data is used multiple times. The trained ANNs are then applied to experimental data. Here, the estimation error for individual cases can be detected by a cross-check of two different ANNs, to improve reliability. A small deviation between the ANNs refers to a valid estimation. The developed method shows a promising approach to estimate the 3-dimensional permeability in a single experiment. It could also be used to extract permeability from flow in geometrically complex, real parts.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (02P22K512)
- Federal Ministry of Economic Affairs and Climate Action (01IF22174N)
This publication has 29 references indexed in Scilit:
- A Machine Learning Strategy for Race-Tracking Detection During Manufacturing of Composites by Liquid MouldingIntegrating Materials and Manufacturing Innovation, 2022
- Out-of-plane permeability measurement for reinforcement textiles: A benchmark exerciseComposites Part A: Applied Science and Manufacturing, 2021
- FlowFrontNet: Improving Carbon Composite Manufacturing with CNNs2021
- In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exerciseComposites Part A: Applied Science and Manufacturing, 2019
- Experimental determination of the permeability of engineering textiles: Benchmark IIComposites Part A: Applied Science and Manufacturing, 2014
- Characterization of 3D fiber preform permeability tensor in radial flow using an inverse algorithm based on sensors and simulationComposites Part A: Applied Science and Manufacturing, 2011
- Experimental determination of the permeability of textiles: A benchmark exerciseComposites Part A: Applied Science and Manufacturing, 2011
- Permeability characterization. Part 1: A proposed standard reference fabric for permeabilityPolymer Composites, 1995
- Permeability characteristics of multilayer fiber reinforcements. Part II: Theoretical modelPolymer Composites, 1991
- Theoretical derivation of Darcy's lawActa Mechanica, 1977