Influence of endwall slotted injection on performance and flow physics in a compressor cascade
Authors:
- 3 August 2020
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 235 (3) , 319-334
Abstract
Air injection is an effectively methodology to suppress flow separation and to improve blade loading of airfoils and compressors. In order to remove corner separations in a cascade, investigation of endwall slotted injection was carried out numerically in this study. Based on endwall slot schemes of other flow control methods, six different endwall slots were designed, aiming at revealing the axial location effect and pitchwise location effect. For each endwall slot, numerical simulations were performed with six different injection directions to uncover the injection direction effect. Results showed that endwall slotted injection can effectively remove the corner separation. The overall loss coefficient and endwall loss coefficient of the cascade were reduced by 10.3% and 36.8% at most, respectively. Injection from leading edge and mid-chord can reduce endwall loss; however, the optimal axial location of endwall slot is near the trailing edge, where the corner separation is located. Different with other flow control methods, in general, the optimal pitchwise location of endwall slot is not close to suction surface but 0.16 pitch away from it. Injection near the suction surface is more sensitive to injection direction compared with injection at 0.16 pitch away from suction surface. Injection with velocity components both downstream and toward suction surface promises optimal control effect on corner separation. However, at mid-span, trailing edge separation is deteriorated and the flow turning angle is reduced, the flow mechanism being that the low-momentum fluid migrates along spanwise.Keywords
This publication has 27 references indexed in Scilit:
- Passive Separation Control with Blade-End Slots in a Highly Loaded Compressor CascadeAIAA Journal, 2020
- Evaluation of Compressor Blading With Blade End Slots and Full-Span Slots in a Highly Loaded Compressor CascadeJournal of Turbomachinery, 2019
- Corner Separation Control by Boundary Layer Suction Applied to a Highly Loaded Axial Compressor CascadeEnergies, 2014
- Numerical Investigations of the Efficiency of Circulation Control in a Compressor StatorJournal of Turbomachinery, 2011
- Experimental Investigation of Endwall and Suction Side Blowing in a Highly Loaded Compressor Stator CascadeJournal of Turbomachinery, 2011
- The Design of Highly Loaded Axial CompressorsJournal of Turbomachinery, 2010
- Three-Dimensional Separations in Axial CompressorsJournal of Turbomachinery, 2005
- Experimental Investigation of a Transonic Aspirated CompressorJournal of Turbomachinery, 2003
- Three-Dimensional Flow in a Highly Loaded Single-Stage Transonic FanJournal of Turbomachinery, 1995
- Highly Loaded Axial Flow Compressors: History and Current DevelopmentsJournal of Turbomachinery, 1990