A Low‐Cost Via‐Less Air‐Filled Waveguide in Multilayer PCB for High‐Frequency Circuits Based on Artificial Magnetic Conductors
Open Access
- 3 May 2026
- journal article
- research article
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 61 (5)
Abstract
This paper proposes a novel, low‐cost, AMC‐based via‐less approach to implementing air‐filled waveguides (AFWs) embedded within multilayer printed circuit board structures to achieve low propagation loss. Three layers of low‐cost FR4 substrates are sandwiched together using prepreg to form the basic AFW structure. To overcome the technical impossibility of seamless vertical metalization in multilayer LCP or FR4 processes, an electroplating technology combined with planar artificial magnetic conductor (AMC) surfaces is employed to construct the waveguide sidewalls. The AMC structures effectively create a virtual magnetic wall that suppresses electromagnetic (EM) leakage through the unplated prepreg layers. To further enhance field confinement and reduce junction leakage, a modified AMC structure incorporating longitudinal metal strips is introduced. Numerical simulations at 77 GHz demonstrate that the proposed AFW achieves a remarkably low theoretical propagation loss of 0.08 dB/cm. A prototype was fabricated and measured to validate the design. While transition‐region fabrication sensitivities affected the absolute insertion loss, the intrinsic propagation loss of the waveguide core was extracted using a multi‐length transmission line method, yielding an experimental result of 0.16 dB/cm. The proposed architecture provides a highly integrable, cost‐effective, and high‐performance solution for millimeter‐wave (mmWave) and sub‐terahertz applications, such as automotive radar and 5G/6G communications, where traditional substrate‐integrated waveguides (SIW) suffer from high dielectric losses.Keywords
This publication has 17 references indexed in Scilit:
- Gap Waveguide Technology for Millimeter-Wave Antenna SystemsIEEE Communications Magazine, 2018
- Gain and Efficiency Enhancement of a 77 GHz On-Chip Antenna through AMC and Superstrate Package2018
- Optimization and Implementation of SIW Slot Array for Both Medium- and Long-Range 77 GHz Automotive Radar ApplicationIEEE Transactions on Antennas and Propagation, 2018
- Comparison of array antenna designs for 77GHz radar Applications2016
- A Low-Cost Wideband 77-GHz Planar Butler Matrix in SIW TechnologyIEEE Transactions on Antennas and Propagation, 2012
- State of the Art in 60-GHz Integrated Circuits and Systems for Wireless CommunicationsProceedings of the IEEE, 2011
- Local Metamaterial-Based Waveguides in Gaps Between Parallel Metal PlatesIEEE Antennas and Wireless Propagation Letters, 2008
- Reduction of dielectric losses in substrate integrated waveguideElectronics Letters, 2006
- Tailoring the AMC and EBG Characteristics of Periodic Metallic Arrays Printed on Grounded Dielectric SubstrateIEEE Transactions on Antennas and Propagation, 2006
- High-impedance electromagnetic surfaces with a forbidden frequency bandIEEE Transactions on Microwave Theory and Techniques, 1999