Performance assessment and millisecond-scale calculation method of the next-generation radioisotope thermoelectric generator and its extended configurations
Authors:
- Li TailinLTLi Tailin
- Zhang YingzengZYZhang Yingzeng
- Chen HaodongCHChen Haodong
- Wang QinWQWang Qin
- Zezhong WeiZWZezhong Wei
- Li JingLJLi Jing
- Guojun HuGHGuojun Hu
- Xiang QingpeiXQXiang Qingpei
Preprint
- 10 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The next-generation radioisotope thermoelectric generator (NG-RTG) is a high-power RTG under development within the US Radioisotope Power Systems (RPS) Program. The detailed thermoelectric performance of this generator and its extended configurations remains unclear. Using NG-RTG Mod-1 as the baseline, one-eighth symmetry COMSOL models of the standard design and two extended configurations containing 8 and 18 general-purpose heat source (GPHS) modules were developed. To address the long solution times and convergence difficulties caused by the complex RTG structure, a millisecond-scale calculation method was also developed. It combined a one-dimensional thermal-resistance network, a Kirchhoff transformation for non-linear heat conduction problem, and an equivalent representation of the segmented unicouple to calculate load performance from open-circuit temperatures. Each calculation required approximately 20 ms, compared with tens of minutes for the corresponding finite-element model. NG-RTG (Standard) produced 251.5 We power at 28 V, consistent with the latest range reported by NASA. Despite its fewer heat source, the NG-RTG (8 GPHS) maintained a maximum specific power of 4.35 We/kg, whereas NG-RTG (18 GPHS) increased maximum specific power by 8.8%. The maximum relative error in open-circuit temperature was below 1.5%, and the output power error under load was generally within 5%; the maximum power error for NG-RTG (Standard) was only 4 We. The method also remained applicable after fuel decay, with output power errors within 1.8%. These models and the calculation method can support configuration extension, operating-parameter assessment, and rapid engineering iteration for high-power, axially stacked RTGs such as the NG-RTG.Keywords
This publication has 14 references indexed in Scilit:
- Performance and structural optimization of milliwatt-level radioisotope thermoelectric generators with end-mounted thermoelectric modulesNuclear Engineering and Design, 2026
- Comprehensive modeling and characterization of the General-Purpose Heat Source Radioisotope Thermoelectric Generator for solar system missionsApplied Thermal Engineering, 2024
- New formulation of the theory of thermoelectric generators operating under constant heat fluxEnergy & Environmental Science, 2021
- European Radioisotope Thermoelectric Generators (RTGs) and Radioisotope Heater Units (RHUs) for Space Science and ExplorationSpace Science Reviews, 2019
- Thermal and electrical analysis of SiGe thermoelectric unicouple filled with thermal insulation materialsApplied Thermal Engineering, 2018
- Realizing a thermoelectric conversion efficiency of 12% in bismuth telluride/skutterudite segmented modules through full-parameter optimization and energy-loss minimized integrationEnergy & Environmental Science, 2017
- Equivalent parameters for series thermoelectricsEnergy Conversion and Management, 2015
- Heat conduction in nuclear fuel by the Kirchhoff transformationAnnals of Nuclear Energy, 2013
- Fabrication of improved sige alloys for an 18-couple module testAIP Conference Proceedings, 1995
- Design and analysis of RTGs for CRAF and Cassini missionsAIP Conference Proceedings, 1991