Small‐Scale Deformation of Pulsed Electric Current Sintered Silicon Oxycarbide Polymer Derived Ceramics
- 24 July 2013
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 15 (11) , 1040-1045
Abstract
The deformation behavior of pulsed electric current sintered silicon oxycarbide ceramics produced by the solid‐state thermolysis of polyhydridomethylsiloxane at small‐scale is investigated. The ceramics remained X‐ray amorphous after sintering at 1300 °C in vacuum and a high density of ≈2.35 g cm−3 is achieved. The elastic constants of these ceramics are determined using non‐destructive ultrasonic testing method. The elasto‐plastic deformation under contact loading is determined using depth sensing nanoindentation technique. An indentation hardness of ≈11 GPa and reduced elastic modulus of ≈105 GPa is observed. The load–displacement curves display significant elastic recovery with an elastic work ratio of ≈0.71. The evolution of Hertzian cone cracks upon microindentation indicates an anomalous deformation behavior.Keywords
This publication has 32 references indexed in Scilit:
- Polymer-derived mesoporous SiOC/ZnO nanocomposite for the purification of water contaminated with organic dyesMicroporous and Mesoporous Materials, 2012
- Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering ProcessJournal of the American Ceramic Society, 2010
- Microporous ceramic coated SnO2 sensors for hydrogen and carbon monoxide sensing in harsh reducing conditionsSensors and Actuators B: Chemical, 2010
- Consolidation/synthesis of materials by electric current activated/assisted sinteringMaterials Science and Engineering: R: Reports, 2009
- Fabrication and characterization of fully dense Si–C–N ceramics from a poly(ureamethylvinyl)silazane precursorJournal of the European Ceramic Society, 2009
- Development of Dense Filler‐Free Polymer‐Derived SiOC Ceramics by Field‐Assisted SinteringJournal of the American Ceramic Society, 2008
- The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering methodJournal of Materials Science, 2006
- Silicon-Based Polymer-Derived Ceramics: Synthesis Properties and Applications-A ReviewJournal of the Ceramic Society of Japan, 2006
- Silicon Nitride–Silicon Carbide Nancocomposites Fabricated by Electric‐Field‐Assisted SinteringJournal of the American Ceramic Society, 2003
- Mechanical properties of a fully dense polymer derived ceramic made by a novel pressure casting processActa Materialia, 2002