Formation and characterization of polyurethane—vermiculite clay nanocomposite foams
- 25 July 2008
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 48 (9) , 1778-1784
Abstract
Nanocomposites of rigid polyurethane foam with unmodified vermiculite clay are synthesized. The clay is dispersed either in polyol or isocyanate before blending. The viscosity of the polyol is found to increase slightly on the addition of clay up to 5 pphp (parts per hundred parts of polyol by weight). The gel time and rise time are significantly reduced by the addition of clay, indicating that the clay acts as a heterogeneous catalyst for the foaming and polymerization reactions. X‐ray diffraction and transmission electron microscopy of the polyurethane composite foams indicate that the clay is partially exfoliated in the polymer matrix. The clay is found to induce gas bubble nucleation resulting in smaller cells with a narrower size distribution in the cured foam. The closed cell content of the clay nanocomposite foams increases slightly with clay concentration. The mechanical properties are found to be the best at 2.3 wt% of clay when the clay is dispersed in the isocyanate; the compressive strength and modulus normalized to a density of 40 kg/m3 are 40% and 34% higher than the foam without clay, respectively. The thermal conductivity is found to be 10% lower than the foam without clay. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics EngineersKeywords
This publication has 24 references indexed in Scilit:
- Polyurethane Foam−Clay Nanocomposites: Nanoclays as Cell OpenersIndustrial & Engineering Chemistry Research, 2006
- Polyurethane/clay nanocomposites foams: processing, structure and propertiesPolymer, 2005
- Effects of melt‐processing conditions on the quality of poly(ethylene terephthalate) montmorillonite clay nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2002
- Predicting the binding energy for nylon 6,6/clay nanocomposites by molecular modelingPolymer, 2002
- Poly(methyl methacrylate) and Polystyrene/Clay Nanocomposites Prepared by in-Situ PolymerizationMacromolecules, 2001
- Flammability Properties of Polymer−Layered-Silicate Nanocomposites. Polypropylene and Polystyrene NanocompositesChemistry of Materials, 2000
- Synthesis of nylon 6-clay hybridJournal of Materials Research, 1993
- Synthesis of nylon 6–clay hybrid by montmorillonite intercalated with ϵ‐caprolactamJournal of Polymer Science Part A: Polymer Chemistry, 1993
- Curing kinetics of a rigid polyurethane foam formulationPolymer, 1982
- Viscosity changes during isothermal and adiabatic urethane network polymerizationPolymer Engineering & Science, 1980