Fabrication of transparent Y 2 O 3 ceramics by two‐step spark plasma sintering
- 9 June 2021
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 104 (11) , 5501-5508
Abstract
Transparent Y 2 O 3 ceramics were successfully fabricated by spark plasma sintering applying a two‐step pressure and heating profile. Through the shrinkage curve of the single‐step SPS profile, it was confirmed that shrinkage occurred at 800°C–1250°C, and it was selected as the two‐step pressure profile. After the first‐step SPS stage at 1250°C, the second‐step SPS stage, which had the highest real in‐line transmittance, was completed at 1500°C. The two‐step SPS profile improved the shrinkage behavior and was able to achieve sufficient densification without excessive coarsening. As a result, the normalized real in‐line transmittance to 1 mm was 80.6% at 1100 nm, which is close to the theoretical transmittance of 81.6%. The two‐step pressure and heating profile in the SPS process was a significant advantage in manufacturing ceramics that were transparent and had sufficient densification.Keywords
This publication has 23 references indexed in Scilit:
- Effect of powder milling routes on the sinterability and optical properties of transparent Y2O3 ceramicsJournal of the European Ceramic Society, 2021
- Non-uniform microstructure evolution in transparent alumina during dwell stage of high-pressure spark plasma sinteringActa Materialia, 2020
- Highly transparent Yb:Y2O3 ceramics obtained by solid-state reaction and combined sintering proceduresCeramics International, 2019
- Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealingJournal of the European Ceramic Society, 2018
- Optical spectroscopic properties, 0.946 and 1.074 μm laser performances of Nd 3+ -doped Y 2 O 3 transparent ceramicsJournal of Alloys and Compounds, 2017
- Reduction in sintering temperature for flash-sintering of yttria by nickel cation-dopingActa Materialia, 2016
- Dynamic grain growth during low-temperature spark plasma sintering of aluminaScripta Materialia, 2014
- Densification mechanisms in spark plasma sintering of nanocrystalline ceramicsMaterials Science and Engineering: A, 2007
- Photoluminescence Characteristics of Y2O3:Eu3+ Nanophosphors Prepared Using Sol−Gel ThermolysisThe Journal of Physical Chemistry B, 2001
- High-temperature infrared properties of sapphire, AlON, fused silica, yttria, and spinelInfrared Physics & Technology, 1998