Effects on microhardness, tensile strength, deflection, and drop weight impact resistance with the addition of hybrid filler materials for enhancing GFRP composites
Open Access
- 11 November 2024
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-27
Abstract
The work evaluated the usage of various filler materials, namely aluminium oxide (Al2O3), magnesium (Mg), and glass powder, in the bidirectional glass fibre reinforced polymer (GFRP) composites. The required samples were fabricated using the hand lay-up technique by varying the filler material proportions from 0%wt. to 7.5%wt., including individual and hybrid mixture combinations. The prepared samples were evaluated for their microhardness, tensile strength, deflection characteristics, and drop-weight impact resistance. It was observed that the optimal addition of individual filler material improved the microhardness and tensile strength more than that of neat composites. In contrast, hybrid compositions at higher proportions exhibited brittleness and lower enactment due to their poor interfacial bonding and particle agglomerations. The deflection characteristics and drop-weight impact tests also showed enhanced stiffness and impact resistance with the addition of hybrid mixtures of filler materials to the composites. The study supports the potential use of adding filler materials to the composites for lightweight structural applications.Keywords
This publication has 24 references indexed in Scilit:
- Experimental optimization of CuO and MgO hybrid nanoparticle reinforcement ratios to enhance fatigue life of GFRP compositesPolymer Composites, 2024
- Comprehensive assessment of hybrid GFRP-graphite filler using modified complex Arcan fixture: Experimental and simulation approachComposites Part A: Applied Science and Manufacturing, 2024
- Advanced properties and failure characteristics of hybrid GFRP-matrix thin laminates modified by micro glass powder filler for hard structure applicationsJournal of Engineering Research, 2023
- Experimental study on mixing ratio effect of hybrid graphene nanoplatelet/nano-silica reinforcement on the static and fatigue life of aluminum-to-GFRP bonded joints under four-point bendingComposite Structures, 2022
- A state-of-the-art review on potential applications of natural fiber-reinforced polymer composite filled with inorganic nanoparticleComposites Part C: Open Access, 2022
- Characterization of epoxy composites reinforced with CaCO3-Al2O3-MgO-TiO2/CuO filler materialsAlexandria Engineering Journal, 2020
- The history of fiber-reinforced polymer composite laminate fatigueInternational Journal of Fatigue, 2020
- Mechanical properties of fire-retardant glass fiber-reinforced polymer materials with alumina tri-hydrate fillerComposites Part B: Engineering, 2015
- Thermal stress relaxation in magnesium matrix composites controlled by dislocation breakawayComposites Science and Technology, 2010
- Textural and chemical factors affecting adsorption capacity of activated carbon in highly efficient desulfurization of diesel fuelCarbon, 2009