Nagarajan Sathiya Narayanan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nagarajan Sathiya Narayanan has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Bodethala Narayanan Vedha Hari
Department of Pharmacy, School of Chemical and Biotechnology, SASTRA Deemed University, Thanjavur 613-401, India
2 shared publications M. Ganesan
Saranathan College of Engineering
2 shared publicationsN. Baskar
Saranathan College of Engineering
2 shared publicationsArjun Venkatesan
School of Mechanical Engineering, SASTRA Deemed University, Thanjavur, Tamil Nadu, India
1 shared publicationArvind Ragunathan
1 shared publicationAshwin Ravi
School of Mechanical Engineering, SASTRA Deemed University, Thanjavur, Tamil Nadu, India
1 shared publication
Latest Publications
- Open Access
- 29 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Integrated multi-assessment and structural performance index framework for stacking-sequence optimisation of natural fibre reinforced laminates
Natural fibre-reinforced polymer composites (NFRPCs) are sustainable alternatives to synthetic laminates; conversely, their structural reliability is influenced by type of fibre, fibre orientation and stacking architecture. In this work, ten sample laminate configurations (S1–S10) with Flax (F), Hemp (H), and Kenaf (K) fibres were fabricated using a hand lay-up method with single-layer (SL), double-layer (DL), and alternating-layer (AL) sequences under 0/90° and ± 45° orientations. Mechanical properties, namely tensile, flexural, and compressive strengths, were experimentally evaluated. The double-layer 0/90° configuration (S7) demonstrated optimal mechanical performance, achieving Tensile, Flexural, and Compressive strengths of 57.13 MPa, 60.50 MPa, and 638.63 MPa, respectively. Shifts in the laminate orientation from 0/90° to ± 45° resulted in tensile reductions of up to 54%, thereby enhancing shear-dominated stress redistribution. A mechanics-informed Structural Performance Index (SPI) framework was developed, incorporating normalised tensile, flexural, and compressive responses into application-specific structural indicators. The SPI-based evaluation recognised S7 as the best arrangement for structural and crash-dominant scenarios (SPI = 0.99), whereas kenaf-dominant laminates (S5) were recommended for the stiffness-oriented applications. The proposed SPI methodology delivers a decision tool that associates experimental characterisation and reliability-driven laminate selection for multi-axial engineering applications.
- 29 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessIntegrated multi-assessment and structural performance index framework for stacking-sequence optimisation of natural fibre reinforced laminates
Natural fibre-reinforced polymer composites (NFRPCs) are sustainable alternatives to synthetic laminates; conversely, their structural reliability is influenced by type of fibre, fibre orientation and stacking architecture. In this work, ten sample laminate configurations (S1–S10) with Flax (F), Hemp (H), and Kenaf (K) fibres were fabricated using a hand lay-up method with single-layer (SL), double-layer (DL), and alternating-layer (AL) sequences under 0/90° and ± 45° orientations. Mechanical properties, namely tensile, flexural, and compressive strengths, were experimentally evaluated. The double-layer 0/90° configuration (S7) demonstrated optimal mechanical performance, achieving Tensile, Flexural, and Compressive strengths of 57.13 MPa, 60.50 MPa, and 638.63 MPa, respectively. Shifts in the laminate orientation from 0/90° to ± 45° resulted in tensile reductions of up to 54%, thereby enhancing shear-dominated stress redistribution. A mechanics-informed Structural Performance Index (SPI) framework was developed, incorporating normalised tensile, flexural, and compressive responses into application-specific structural indicators. The SPI-based evaluation recognised S7 as the best arrangement for structural and crash-dominant scenarios (SPI = 0.99), whereas kenaf-dominant laminates (S5) were recommended for the stiffness-oriented applications. The proposed SPI methodology delivers a decision tool that associates experimental characterisation and reliability-driven laminate selection for multi-axial engineering applications.
- Open Access
- 23 April 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 42, 5950-5963
Energy-efficient machining using untextured and laser textured cutting inserts: Experimental investigation and pareto-based optimisation
- 23 April 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 42, 5950-5963
Open AccessEnergy-efficient machining using untextured and laser textured cutting inserts: Experimental investigation and pareto-based optimisation
- 20 December 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (3) , 1467-1478
Aluminium Tri-Hydroxide Modified Epoxy Resin as a Flame-Retardant Edge-Sealant to Mitigate Flammability in Drilled CFRP Composites
- 20 December 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (3) , 1467-1478
Aluminium Tri-Hydroxide Modified Epoxy Resin as a Flame-Retardant Edge-Sealant to Mitigate Flammability in Drilled CFRP Composites
- 30 September 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Effect of inorganic flame retardants on the thermo-mechanical and fire-resistant properties of pineapple leaf fiber composites
Epoxy composites reinforced with pineapple leaf fiber (PALF) composites were fabricated and modified with three distinct flame retardants, namely aluminum hydroxide (Al(OH) 3 ), magnesium hydroxide (Mg(OH) 2 ), and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), at filler concentrations of 20, 40, and 60 wt.%. The samples were characterized using Limiting Oxygen Index (LOI), Shore D hardness, Raman spectroscopy, and thermo-mechanical analysis (TMA) as per the ASTM standards. The flame-retardant-modified composites exhibited significant improvement in LOI values compared to the neat composite (20% LOI), achieving 23–27% LOI with Al(OH) 3 , 24–30% LOI with Mg(OH) 2 , and 24–27% LOI with DOPO. The UL-94 vertical flammability testing showed that 40 wt.% of flame retardants achieved a V-0 rating, indicating superior self-extinguishing behavior. Scanning electron microscopy images of filler materials modified PALF composites displayed significant improvements. The use of Al(OH) 3 and Mg(OH) 2 filled the interfacial gaps and acted as barrier layers, helping to reduce the fiber exposure. DOPO-filled PALF composites observed with phosphorus-rich char precursors and porous protective structures. These features of flame-retardant filler materials improved char formation, suppressed the volatile release, and provided better condensed-phase protection. The Shore D hardness results observed with a moderate reduction in the hardness of modified composites compared to the neat composite. Raman spectral evaluation supported the char formation and water vapor release in Mg(OH) 2 -modified composites, supporting its superior barrier action and alignment with LOI performance. TMA exhibited that the 40 wt.% Mg(OH) 2 observed to have a higher glass transition temperature (Tg) modified than that of the neat PALF composite. The reduction in coefficient of thermal expansion at the glassy and rubbery regions confirms that modified composites effectively restrict the polymer chain and provide better dimensional stability. Mg(OH) 2 -modified PALF composites exhibit significantly better flame-retardant performance compared to neat PALF, which indicates their potential for use in fire-safe, lightweight materials.
- 30 September 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Effect of inorganic flame retardants on the thermo-mechanical and fire-resistant properties of pineapple leaf fiber composites
Epoxy composites reinforced with pineapple leaf fiber (PALF) composites were fabricated and modified with three distinct flame retardants, namely aluminum hydroxide (Al(OH) 3 ), magnesium hydroxide (Mg(OH) 2 ), and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), at filler concentrations of 20, 40, and 60 wt.%. The samples were characterized using Limiting Oxygen Index (LOI), Shore D hardness, Raman spectroscopy, and thermo-mechanical analysis (TMA) as per the ASTM standards. The flame-retardant-modified composites exhibited significant improvement in LOI values compared to the neat composite (20% LOI), achieving 23–27% LOI with Al(OH) 3 , 24–30% LOI with Mg(OH) 2 , and 24–27% LOI with DOPO. The UL-94 vertical flammability testing showed that 40 wt.% of flame retardants achieved a V-0 rating, indicating superior self-extinguishing behavior. Scanning electron microscopy images of filler materials modified PALF composites displayed significant improvements. The use of Al(OH) 3 and Mg(OH) 2 filled the interfacial gaps and acted as barrier layers, helping to reduce the fiber exposure. DOPO-filled PALF composites observed with phosphorus-rich char precursors and porous protective structures. These features of flame-retardant filler materials improved char formation, suppressed the volatile release, and provided better condensed-phase protection. The Shore D hardness results observed with a moderate reduction in the hardness of modified composites compared to the neat composite. Raman spectral evaluation supported the char formation and water vapor release in Mg(OH) 2 -modified composites, supporting its superior barrier action and alignment with LOI performance. TMA exhibited that the 40 wt.% Mg(OH) 2 observed to have a higher glass transition temperature (Tg) modified than that of the neat PALF composite. The reduction in coefficient of thermal expansion at the glassy and rubbery regions confirms that modified composites effectively restrict the polymer chain and provide better dimensional stability. Mg(OH) 2 -modified PALF composites exhibit significantly better flame-retardant performance compared to neat PALF, which indicates their potential for use in fire-safe, lightweight materials.
- Open Access
- 11 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-27
Effects on microhardness, tensile strength, deflection, and drop weight impact resistance with the addition of hybrid filler materials for enhancing GFRP composites
The work evaluated the usage of various filler materials, namely aluminium oxide (Al2O3), magnesium (Mg), and glass powder, in the bidirectional glass fibre reinforced polymer (GFRP) composites. The required samples were fabricated using the hand lay-up technique by varying the filler material proportions from 0%wt. to 7.5%wt., including individual and hybrid mixture combinations. The prepared samples were evaluated for their microhardness, tensile strength, deflection characteristics, and drop-weight impact resistance. It was observed that the optimal addition of individual filler material improved the microhardness and tensile strength more than that of neat composites. In contrast, hybrid compositions at higher proportions exhibited brittleness and lower enactment due to their poor interfacial bonding and particle agglomerations. The deflection characteristics and drop-weight impact tests also showed enhanced stiffness and impact resistance with the addition of hybrid mixtures of filler materials to the composites. The study supports the potential use of adding filler materials to the composites for lightweight structural applications.
- 11 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-27
Open AccessEffects on microhardness, tensile strength, deflection, and drop weight impact resistance with the addition of hybrid filler materials for enhancing GFRP composites
The work evaluated the usage of various filler materials, namely aluminium oxide (Al2O3), magnesium (Mg), and glass powder, in the bidirectional glass fibre reinforced polymer (GFRP) composites. The required samples were fabricated using the hand lay-up technique by varying the filler material proportions from 0%wt. to 7.5%wt., including individual and hybrid mixture combinations. The prepared samples were evaluated for their microhardness, tensile strength, deflection characteristics, and drop-weight impact resistance. It was observed that the optimal addition of individual filler material improved the microhardness and tensile strength more than that of neat composites. In contrast, hybrid compositions at higher proportions exhibited brittleness and lower enactment due to their poor interfacial bonding and particle agglomerations. The deflection characteristics and drop-weight impact tests also showed enhanced stiffness and impact resistance with the addition of hybrid mixtures of filler materials to the composites. The study supports the potential use of adding filler materials to the composites for lightweight structural applications.
- 1 April 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 46, 8283-8287
Performance of surface textured PCD inserts with wettability chemical solutions for machining operation
- 1 April 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 46, 8283-8287
Performance of surface textured PCD inserts with wettability chemical solutions for machining operation
- Open Access
- 1 December 2020
- Published by Elsevier in Journal of Magnesium and Alloys
- Vol. 8 (4) , 1262-1268
Influence of thermomechanical processing on microstructure, mechanical and strain hardening properties of single-phase Mg-4Li-0.5Ca alloy for structural application
- 1 December 2020
- Published by Elsevier in Journal of Magnesium and Alloys
- Vol. 8 (4) , 1262-1268
Open AccessInfluence of thermomechanical processing on microstructure, mechanical and strain hardening properties of single-phase Mg-4Li-0.5Ca alloy for structural application
- Open Access
- 20 October 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-12
Synthesis of bio-oil from waste Trichosanthes cucumerina seeds: a substitute for conventional fuel
The present study explores the methodology for the synthesis of bio-oil from waste trichosanthes cucumerina seeds by the solvent extraction method. It investigates the yield percentage, concentration of free fatty acids and acid contents in the extracted bio-oil. Effects of size of the crushed seeds, moisture content, extraction time, solvent to seed ratio and extraction temperatures were examined. The non-polar hexane solvent resulted in a higher percentage of oil yield (28.4 ± 0.4%) for the crushed seed size of 0.21 mm, 6% moisture content, 270 min extraction time, 68 °C temperature and 6:1(ml/g) of solvent to seed ratio. The synthesized bio-oil was characterized using Fourier Transform Infra-Red spectrum and Gas Chromatography–Mass Spectroscopy analysis. The properties of the bio-oil and biodiesel were assessed according to the American Society for Testing and Materials and the Association of Official Analytical Chemists standards. The obtained methyl-ester by trans-esterification process results in the fuel properties closer to the conventional fuel. Thus, Trichosanthes cucumerina bio-diesel can be used as a potential substitute.
- 20 October 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-12
Open AccessSynthesis of bio-oil from waste Trichosanthes cucumerina seeds: a substitute for conventional fuel
The present study explores the methodology for the synthesis of bio-oil from waste trichosanthes cucumerina seeds by the solvent extraction method. It investigates the yield percentage, concentration of free fatty acids and acid contents in the extracted bio-oil. Effects of size of the crushed seeds, moisture content, extraction time, solvent to seed ratio and extraction temperatures were examined. The non-polar hexane solvent resulted in a higher percentage of oil yield (28.4 ± 0.4%) for the crushed seed size of 0.21 mm, 6% moisture content, 270 min extraction time, 68 °C temperature and 6:1(ml/g) of solvent to seed ratio. The synthesized bio-oil was characterized using Fourier Transform Infra-Red spectrum and Gas Chromatography–Mass Spectroscopy analysis. The properties of the bio-oil and biodiesel were assessed according to the American Society for Testing and Materials and the Association of Official Analytical Chemists standards. The obtained methyl-ester by trans-esterification process results in the fuel properties closer to the conventional fuel. Thus, Trichosanthes cucumerina bio-diesel can be used as a potential substitute.
- Open Access
- 28 November 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-9
Performance of Cutting Tool with Cross-Chevron Surface Texture Filled with Green Synthesized Aluminium Oxide Nanoparticles
The newer methodology to improve the performance of cutting tool is by the constructive method of micro-texturing and green synthesized nanoparticles into the texture gaps for self-lubrication. Cross-chevron textures were made on the rake face of the cemented carbide tool using Neodymium Doped Yttrium Aluminium Garne (Nd-YAG) laser texturing machine. The environmentally friendly, non-hazardous and rapid method of producing nanoparticles was followed to produce Al2O3 nanoparticles. Various techniques used for characterizing the synthesized Al2O3 nanoparticles are Potential of Hydrogen (pH), Fourier Transform Infra-Red Spectroscopy Analysis (FTIR), Dynamic light scattering (DLS) and X-Ray Diffraction (XRD). The XRD shows the presence of required functional groups and the size of nanoparticles in the range of 500–550 nm. This article discusses the effect of textures, with and without nanoparticles filled on the texture gaps of the cemented carbide tool on the main cutting force, thrust force and co-efficient of friction while machining austenitic stainless steel 304. The combined effect of surface texturing and lubrication of Al2O3 nanoparticles enhanced the performance of the cutting tool compared with the conventional and textured tool.
- 28 November 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-9
Open AccessPerformance of Cutting Tool with Cross-Chevron Surface Texture Filled with Green Synthesized Aluminium Oxide Nanoparticles
The newer methodology to improve the performance of cutting tool is by the constructive method of micro-texturing and green synthesized nanoparticles into the texture gaps for self-lubrication. Cross-chevron textures were made on the rake face of the cemented carbide tool using Neodymium Doped Yttrium Aluminium Garne (Nd-YAG) laser texturing machine. The environmentally friendly, non-hazardous and rapid method of producing nanoparticles was followed to produce Al2O3 nanoparticles. Various techniques used for characterizing the synthesized Al2O3 nanoparticles are Potential of Hydrogen (pH), Fourier Transform Infra-Red Spectroscopy Analysis (FTIR), Dynamic light scattering (DLS) and X-Ray Diffraction (XRD). The XRD shows the presence of required functional groups and the size of nanoparticles in the range of 500–550 nm. This article discusses the effect of textures, with and without nanoparticles filled on the texture gaps of the cemented carbide tool on the main cutting force, thrust force and co-efficient of friction while machining austenitic stainless steel 304. The combined effect of surface texturing and lubrication of Al2O3 nanoparticles enhanced the performance of the cutting tool compared with the conventional and textured tool.