Measurement of Structural Loads Using a Novel MEMS Extrinsic Fabry–Perot Strain Sensor
Open Access
- 18 December 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (1) , 18
Abstract
In this paper, microelectromechanical systems (MEMS) technology was used to fabricate a novel extrinsic fiber Fabry–Perot (EFFP) strain sensor; this fiber sensor is applied to measure load with higher precision for a small structure. The sensor cavity consists of two Fabry–Perot (FP) cavity mirrors that are processed by surface micromachining and then fused and spliced together by the silicon–glass anode bonding process. The initial cavity length can be strictly controlled, and the excellent parallelism of the two faces of the cavity results in a high interference fineness. Then, the anti-reflection coating process is applied to the sensor to improve the clarity of the interference signal with the cavity, with its wavelength working within the range of the C + L band. Next, the sensor placement is determined by the finite element software Nastran. Experimental results indicate that the sensor exhibits a good linear response (99.77%) to load changes and a high repeatability. Considering the strain transfer coefficient, the sensitivity for the tested structure load is as high as 35.6 pm/N. Due to the miniaturization, repeatability, and easy-to-batch production, the proposed sensor can be used as a reliable and practical force sensor.Keywords
Funding Information
- Shanghai Academy of Spaceflight Technology (SAST2018-015)
- Aeronautics Science (20170252004)
- Jiangsu province key research and development plan industry foresight and generic key technology competition project (BE2018047)
This publication has 32 references indexed in Scilit:
- Simultaneous measurement of temperature and strain using a long-period fiber grating with a micro-taperOptical Review, 2016
- Overview of Fiber Optic Sensor Technologies for Strain/Temperature Sensing Applications in Composite MaterialsSensors, 2016
- Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and ApplicationsSensors, 2015
- High-sensitivity strain sensor based on in-fiber improved Fabry–Perot interferometerOptics Letters, 2014
- MEMS Fabry-Perot sensor interrogated by optical system-on-a-chip for simultaneous pressure and temperature sensingOptics Express, 2013
- Embedded coupler based on selectively infiltrated photonic crystal fiber for strain measurementOptics Letters, 2012
- Spheroidal Fabry-Perot microcavities in optical fibers for high-sensitivity sensingOptics Express, 2012
- Dynamic Strain Measured by Mach-Zehnder Interferometric Optical Fiber SensorsSensors, 2012
- Interferometric Fiber Optic SensorsSensors, 2012
- Rapid Amplitude and Group-Delay Measurement System Based on Intra-Cavity-Modulated Swept-LasersIEEE Transactions on Instrumentation and Measurement, 2004