Ultrasonic Imaging of Thick Carbon Fiber Reinforced Polymers through Pulse-Compression-Based Phased Array
Open Access
- 7 February 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (4) , 1508
Abstract
The use of pulse-compression in ultrasonic non-destructive testing has assured, in various applications, a significant improvement in the signal-to-noise ratio. In this work, the technique is combined with linear phased array to improve the sensitivity and resolution in the ultrasonic imaging of highly attenuating and scattering materials. A series of tests were conducted on a 60 mm thick carbon fiber reinforced polymer benchmark sample with known defects using a custom-made pulse-compression-based phased array system. Sector scan and total focusing method images of the sample were obtained with the developed system and were compared with those reconstructed by using a commercial pulse-echo phased array system. While an almost identical sensitivity was found in the near field, the pulse-compression-based system surpassed the standard one in the far-field producing a more accurate imaging of the deepest defects and of the backwall of the sample.Keywords
Funding Information
- H2020 Marie Skłodowska-Curie Actions (722134)
This publication has 36 references indexed in Scilit:
- Ultrasonic non-destructive testing of complex titanium/carbon fibre composite jointsUltrasonics, 2019
- Real-time full matrix capture for ultrasonic non-destructive testing with acceleration of post-processing through graphic hardwareNDT & E International, 2012
- Wideband linear power amplifier for high-frequency ultrasonic coded excitation imagingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2012
- Contemporary ultrasonic signal processing approaches for nondestructive evaluation of multilayered structuresNondestructive Testing and Evaluation, 2012
- NonDestructive Evaluation of Carbon Fiber Reinforced Polymers with Ultrasonics and Infrared Thermography: An Overview on Historical Steps and PatentsRecent Patents on Materials Science, 2012
- Modeling the radiation of ultrasonic phased-array transducers with Gaussian beamsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2008
- Ultrasonic arrays for non-destructive evaluation: A reviewNDT & E International, 2006
- Coherent-array imaging using phased subarrays. Part I: basic principlesIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2005
- An ultrasonic wheel-array sensor and its application to aerospace structuresInsight - Non-Destructive Testing and Condition Monitoring, 2003
- Ultrasonic imaging using arraysProceedings of the IEEE, 1979