3D Printing Transparent γ‐Alumina Porous Structures Based on Photopolymerizable Sol–Gel Inks
Open Access
- 17 June 2023
- journal article
- research article
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (23)
Abstract
A novel method for fabricating transparent porous γ‐alumina 3D structures by printing at high resolution is presented. The process is based on combining digital light processing 3D printing (DLP) and sol–gel reactions, all performed in transparent solutions, resulting in ceramic monolithic porous structures. The aqueous printing solution contains mainly aluminum chloride, propylene oxide (PO), ethanol, and acrylic acid (AA). The printed polymerized structures are aged, followed by supercritical drying (SCD), and sintered at high temperatures. During aging and sintering, the printed objects shrink, thus enabling a final printing resolution far beyond the nominal value of the used printer. The resulting structures are crystalline γ‐Al2O3, with a very high surface area, above 1800 m2 g−1, and optical transmission above 80% at 600 nm. In addition, SCD enables precise control of pores’ dimensions and total surface area, which are essential for applications including thermal insulation and catalyst support and for obtaining heat‐resistant transparent optical devices.Keywords
This publication has 42 references indexed in Scilit:
- Amorphous Alumina Nanoparticles: Structure, Surface Energy, and Thermodynamic Phase StabilityThe Journal of Physical Chemistry C, 2013
- Advanced spinel and sub-μm Al2O3 for transparent armour applicationsJournal of the European Ceramic Society, 2009
- Ballistic testing of transparent armour ceramicsJournal of the European Ceramic Society, 2009
- Synthesis of Monolithic Al2O3 with Well-Defined Macropores and Mesostructured Skeletons via the Sol−Gel Process Accompanied by Phase SeparationChemistry of Materials, 2007
- γ‐Alumina as a Support for Catalysts: A Review of Fundamental AspectsEuropean Journal of Inorganic Chemistry, 2005
- Transparent ceramic lamp envelope materialsJournal of Physics D: Applied Physics, 2005
- Synthesis of High-Surface-Area Alumina Aerogels without the Use of Alkoxide PrecursorsChemistry of Materials, 2004
- Transparent Sintered Corundum with High Hardness and StrengthJournal of the American Ceramic Society, 2003
- Control of mixed oxide textural and acidic properties by the sol-gel methodCatalysis Today, 1997
- Sol-gel strategies for controlled porosity inorganic materialsJournal of Membrane Science, 1994