Modification of the Aeration-Supplied Configuration in the Biodrying Process for Refuse-Derived Fuel (RDF) Production
Open Access
Abstract
Biodrying is an essential part of the mechanical–biological treatment process that minimizes moisture content and simultaneously maximizes heating value for refuse-derived fuel (RDF) production. Although the mechanical separation process operates effectively in Thailand’s RDF production, high organic content levels and their degradation cause moisture contamination in RDF, producing wet RDF. Aeration is essential for an effective biodrying process, and can reduce RDF’s moisture content as well as increase its heating value. To maximize the biodrying effect, aeration should be optimized based on the waste conditions. This study proposes a modified aeration-supplied configuration for wet RDF biodrying. The aeration rate was modified based on the period within the biodrying operation; the first period is from the beginning until day 2.5, and the second period is from day 2.5 to day 5. The optimal aeration supply configuration was 0.5 m3/kg/day in the first period and then 0.3 m3/kg/day until the end of the process; this configuration yielded the greatest moisture content decrease of 35% and increased the low heating value of the biodried product by 11%. The final moisture content and low heating value were 24.07% and 4787 kcal/kg, respectively. Therefore, this optimal aeration-supplied configuration could be applied to meet the moisture content and low heating value requirements of the RDF production standard for Thailand’s local cement industry.Keywords
Funding Information
- National Research Council of Thailand (NRCT)
- SCI Eco Services Co., Ltd.
- Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi
- Center of Excellence on Energy Technology and Environment (CEE), the Ministry of Higher Education, Science, Research and Innovation (MHESI)
This publication has 46 references indexed in Scilit:
- Biodrying of municipal solid waste under different ventilation modes: drying efficiency and aqueous pollutionWaste Management & Research: The Journal for a Sustainable Circular Economy, 2012
- Spatial distribution of dynamics characteristic in the intermittent aeration static composting of sewage sludgeBioresource Technology, 2011
- Reject management from a Mechanical Biological Treatment plant in Bangkok, ThailandResources, Conservation and Recycling, 2011
- Effect of air-flow rate and turning frequency on bio-drying of dewatered sludgeWater Research, 2010
- Bio-drying of municipal solid waste with high water content by aeration procedures regulation and inoculationBioresource Technology, 2008
- Effects of compositions on food waste compostingBioresource Technology, 2008
- Influence of aeration rate and biodegradability fractionation on composting kineticsWaste Management, 2008
- Lower Heating Value Dynamics during Municipal Solid Waste Bio-DryingEnvironmental Technology, 2007
- Effects of Moisture and Hydrogen Content on the Heating Value of FuelsEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2007
- Biostabilization?biodrying of municipal solid waste by inverting air-flowBioresource Technology, 2005