Finite Element Analysis of Platform Switching Effects on Stress Distribution in Posterior Implants Placed in Different Bone Types Under Axial and Oblique Loading Conditions
Authors:
Open Access
- 26 June 2025
- journal article
- Published by Springer Nature in Cureus
- Vol. 17 (6) , e86821
Abstract
Introduction: The present study was conducted to compare stress distribution in platform-switched and non-platform-switched implants placed in D2 (mandible) and D3 (maxilla) bones under axial and oblique loading, using finite element analysis (FEA). Materials and methods: Cone-beam computed tomography (CBCT)-derived three-dimensional models of the posterior maxilla (D3) and mandible (D2) were developed. Implants (11.5 × 4.2 mm) were modeled with two abutment configurations: 4.2 mm (non-platform switching) and 3.2 mm (platform switching). Porcelain-fused-to-metal crowns were placed on all models. A vertical (axial) load of 200 N and an oblique load of 200 N at 30° were applied to the left first molar. ANSYS Workbench (ANSYS, Inc., Canonsburg, Pennsylvania) was used to assess the von Mises stress distribution in the cortical bone, cancellous bone, implant, abutment, and abutment screws. Results: Platform switching resulted in lower stress values in both D2 and D3 bones under axial and oblique loads, especially at the crestal bone level. The D3 (maxillary) models exhibited higher stress concentrations overall than the D2 (mandibular) models, indicating a greater biomechanical challenge in less dense bone. Platform switching effectively reduced the peak stresses and led to a more uniform stress distribution. However, the implant and abutment components in the platform-switched models experienced higher internal stress. Conclusion: Platform switching improved stress distribution and reduced crestal bone stress in both D2 and D3 bones, especially under oblique loading.Keywords
This publication has 23 references indexed in Scilit:
- A comparative evaluation of masticatory load distribution in different types of prosthesis with varying number of implants: A FEM analysisJournal of Oral Biology and Craniofacial Research, 2024
- Restoratively driven planning for implants in the posterior maxilla - Part 1: alveolar bone healing, bone assessment and clinical classificationsBritish Dental Journal, 2023
- Parafunctional loading and occlusal device on stress distribution around implants: A 3D finite element analysisThe Journal of Prosthetic Dentistry, 2018
- Maxilla reconstruction with autogenous bone block grafts: computed tomography evaluation and implant survival in a 5-year retrospective studyInternational Journal of Oral and Maxillofacial Surgery, 2017
- Biomechanical investigations of the expanded platform-switching concept in immediately loaded small diameter implantsThe Journal of Prosthetic Dentistry, 2016
- Influence of parafunctional loading and prosthetic connection on stress distribution: A 3D finite element analysisThe Journal of Prosthetic Dentistry, 2015
- Impact of platform switching on marginal peri‐implant bone‐level changes. A systematic review and meta‐analysisClinical Oral Implants Research, 2014
- Three Dimensional Finite Element Analysis of Stress Distribution Around Implant with Straight and Angled Abutments in Different Bone QualitiesThe Journal of Indian Prosthodontic Society, 2013
- Evaluation of Stress Distribution in Bone of Different Densities Using Different Implant Designs: A Three-Dimensional Finite Element AnalysisThe Journal of Indian Prosthodontic Society, 2012
- A 15-year study of osseointegrated implants in the treatment of the edentulous jawInternational Journal of Oral Surgery, 1981