Low profile unsaturated polyester resin–clay nanocomposite properties
- 18 June 2008
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 30 (5) , 629-638
Abstract
Unsaturated polyester (UP)/organically modified clay (OMC) nanocomposites were prepared by multistep simultaneous mixing of UP oligomer chain, styrene (St) monomer, and OMC. X‐ray diffraction, transmission electron microscopy, dynamic mechanical thermal analysis, and scanning electron microscopy data were in support of the formation of a partially intercalated nanocomposite. The glass transition temperatures of the nanocomposites revealed that the crosslinking reaction occurred homogeneously inside and outside of the OMC galleries. Adding 3 wt% OMC improved the flextural and storage modulus of UP by 31.5% and 30.2%, respectively. The Izod impact strength of UP was also improved by 51.7% at 1 wt% of OMC loading. Similar results were obtained for low‐profile UP/St/OMC nanocomposites. Resin shrinkage data measured by inhouse constructed apparatus showed that, at an OMC content of 3 wt%, the UP/St/OMC/low profile additive (LPA) system cannot provide superior volume shrinkage control. But, it is found that the use of nanoscale reinforcement in the UP systems is able to restore flextural and storage moduli loss when using LPAs. POLYM. COMPOS., 2009. © 2008 Society of Plastics EngineersKeywords
This publication has 27 references indexed in Scilit:
- Morphology, thermal, and mechanical properties of polyamide 66/clay nanocomposites with epoxy‐modified organoclayJournal of Applied Polymer Science, 2006
- Flame‐retardant unsaturated polyester resin incorporating nanoclaysPolymers for Advanced Technologies, 2006
- Flame retarded polymer layered silicate nanocomposites: a review of commercial and open literature systemsPolymers for Advanced Technologies, 2006
- A flammability performance comparison between synthetic and natural clays in polystyrene nanocompositesFire and Materials, 2004
- Effect of nanoclay on shrinkage control of low profile unsaturated polyester (UP) resin cured at room temperaturePolymer, 2004
- Recent innovations in barrier technologies for plastic packaging—a reviewPackaging Technology and Science, 2003
- Synthesis and mechanical properties of unsaturated polyester based nanocompositesPolymer Engineering & Science, 2003
- Structure–property relationships in cross-linked polyester–clay nanocompositesPolymer, 2002
- A new process of fabricating electrically conducting nylon 6/graphite nanocomposites via intercalation polymerizationJournal of Polymer Science Part B: Polymer Physics, 2000
- Polymer Layered Silicate NanocompositesAdvanced Materials, 1996