In response to the growing concerns of global warming and the urgent need for sustainable energy solutions, the exploration of alternative energy sources has become increasingly important. Among these, solar energy stands out as a clean, abundant, and renewable option. The efficiency of solar cells depends significantly on the base semiconductor material, with silicon currently dominating global production. However, modern research focuses on enhancing solar cell performance through innovative approaches, such as the deposition of graphene layers using advanced laser-plasma technology. Laser-plasma technology integrates laser ablation and plasma deposition techniques to fabricate high-efficiency thin-film solar cells, including those based on silicon-graphene nanosystems. This approach enables precise structuring, local doping, and film growth at the nanoscale, which enhances optical absorption, electrical conductivity, and carrier collection efficiency. By optimizing the deposition process and exploring various technological conditions, graphene-enhanced solar cells can achieve improved electrical conductivity, better light absorption, and reduced energy losses, paving the way for highly efficient and environmentally friendly solar energy solutions. The presented work discusses the deposition of graphene on a solar cell using laser-plasma deposition technology and the analysis of the results obtained. Experiments were conducted under various technological conditions in order to investigate the optimal conditions for obtaining high-efficiency solar cells. In the experiments used 2-inch diameter, (100) crystallographic orientation and 400 μm thick p-type silicon wafers. Different phosphorus diffusion depths were considered to achieve n-type conductivity. In one case, silicon nitride and graphene were used as the antireflective layer, and in the other case, only graphene was used. The volt-ampere characteristic was measured and the margin action coefficient of the solar cell was estimated in each experiment. The parameters of the solar cell obtained with and without graphene were compared.