Physical and Mechanical Properties of Graphene Nanoplatelet-Reinforced Al6061-T6 Composites Processed by Spark Plasma Sintering
Open Access
- 31 March 2020
- journal article
- research article
- Published by Springer Nature in JOM
- Vol. 72 (6) , 2295-2304
Abstract
Aluminium matrix composites with high specific strength are attracting attention for use in automobile and aerospace applications. Graphene nanoplatelets (GNPs) were added in 0.1, 0.5, and 1 weight fractions to an Al6061 matrix. Spark plasma sintering was used with a combination of solution sonication and ball milling to disperse the GNPs in the Al6061 matrix. The evolution of the microstructure was studied using optical and scanning electron microscopy. The uniformity of the GNP distribution is discussed in light of selected ball milling parameters. Electron backscattered diffraction analysis was used to measure the grain size and misorientation. X-ray diffraction analysis and transmission electron microscopy revealed neat and clean interfaces between the matrix and GNPs. Hardness and tensile testing revealed a considerable increment in the strength of the final composite after addition of GNPs. Traces of GNP clusters were found in the 1 wt.% composite as well as premature failure at lower strain due to the insufficient load transfer capability of the Al6061-T6 matrix. An illustrative two-dimensional model was developed to explain the load transfer behavior and the deterioration of the mechanical properties.Keywords
Funding Information
- Higher Education Commision, Pakistan (213-53249-2EG2-102)
This publication has 39 references indexed in Scilit:
- Exfoliation and dispersion of graphene in ethanol-water mixturesFrontiers of Materials Science, 2012
- Reinforcement with graphene nanosheets in aluminum matrix compositesScripta Materialia, 2012
- Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its propertiesJournal of Alloys and Compounds, 2012
- Fabrication of exfoliated graphite nanoplatelets-reinforced aluminum composites and evaluating their mechanical properties and corrosion behaviorJournal of Analytical and Applied Pyrolysis, 2011
- Graphene–aluminum nanocompositesMaterials Science and Engineering: A, 2011
- Effect of the surface preparation techniques on the EBSD analysis of a friction stir welded AA1100-B4C metal matrix compositeMaterials Characterization, 2011
- The effect of particle size, sintering temperature and sintering time on the properties of Al–Al2O3 composites, made by powder metallurgyJournal of Materials Processing Technology, 2009
- Consolidation/synthesis of materials by electric current activated/assisted sinteringMaterials Science and Engineering: R: Reports, 2009
- Metal matrix composites – From science to technological significanceComposites Science and Technology, 2005
- X-ray diffraction analysis of a severely plastically deformed aluminum alloyActa Materialia, 2004