Applicable Measuring Range of Two-Electrode Type Commercial Electrolytic Conductivity Meter for Accurate Determination of Electrolytic Conductivity
Open Access
- 19 May 2022
- journal article
- research article
- Published by Hindawi Limited in Journal of Chemistry
- Vol. 2022, 1-6
Abstract
Applicable measuring range of electrolytic conductivity (EC) for commercially available two-electrode type EC meter was examined. The measurement error caused by a gap in ECs between the measurement sample and the standard solution was also evaluated. Seven potassium chloride (KCl) solutions including certified reference materials (CRMs) manufactured by the National Metrology Institute of Japan (NMIJ) were measured, and the cell constants observed for commercial EC meters as well as the effect of electrode polarization were compared in detail under strict temperature control. The effect of electrode polarization can be sufficiently small if the frequency is properly selected. In the case of KCl standard solution with concentrations of 0.1molkg-1 (1Sm-1) or less, the obtained cell constants were almost identical to those of declared ones. However, in the case of KCl standard solution with concentrations of 0.5molkg-1 (5Sm-1) or more, the obtained cell constants showed 2-10 higher than those of declared ones. From these results, the calibration by standard solution with closer EC to the measurement solution is especially important if about 1 accuracy of measurement by commercial EC meter is required in higher EC range such as 5Sm-1 or more.Keywords
This publication has 11 references indexed in Scilit:
- Metrological advances in reference measurement procedures for electrolytic conductivityMetrologia, 2019
- High-throughput and precise measurement method for electrolytic conductivity in a higher conductivity range (10 S m−1 to 0.1 S m−1) by chromatography system with conductivity detectorMicrochemical Journal, 2018
- Bridging the Gap Between Ultrapure Water and Reference Materials in Electrolytic Conductivity MeasurementsIEEE Transactions on Instrumentation and Measurement, 2017
- New Japanese certified reference materials for electrolytic conductivity measurementsAccreditation and Quality Assurance, 2017
- Direct Traceability for Ultra-Pure Water ConductivityNCSLI Measure, 2014
- Traceability of electrolytic conductivity measurements to the International System of Units in the sub mSm−1 region and review of models of electrolytic conductivity cellsElectrochimica Acta, 2010
- Primary methods for the measurement of electrolytic conductivityAccreditation and Quality Assurance, 2003
- Molality-based primary standards of electrolytic conductivity (IUPAC Technical Report)Pure and Applied Chemistry, 2001
- A high-accuracy, calibration-free technique for measuring the electrical conductivity of liquidsReview of Scientific Instruments, 1998
- Frequency extrapolation of conductance data for aqueous salt solutionsThe Journal of Physical Chemistry, 1970