Fabrication and Characterization of Copper and Copper Alloys Reinforced with Graphene
Preprint
- 14 June 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
The constant increase in current density in electrical wires leads to increasingly significant heat losses due to Joule effect. Therefore, reducing the electrical resistivity of copper wires becomes necessary. To achieve this goal, the development of a composite material incorporating a more conductive reinforcement, the graphene, is a promising way. The design of a copper/graphene composite using a powder metallurgy-based method is presented. This synthesis method allows for interface control through the growth of CuO(Cu) nanoparticles tightly bonded to the reinforcement. It also involves the dispersion of graphene through ultrasonic treatment and its alignment within the matrix using a uniaxial pressing densification method. The increase in the hardness (+12 HV) demonstrates the effective dispersion and separation of graphene layers. The impact on the electrical properties of dendritic copper (ρe = 2.30 µΩ.cm) remains limited, with a decrease in electrical resistance of approximately 1.4%. However, for copper with higher electrical resistivity, flake copper (at 2.71 µΩ.cm) and brass at (7.66 µΩ.cm), reductions of 2.7% and 10% have been achieved, respectively. With the improvement of graphene quality, there is more room to improve the electrical properties. This work paves the way for the development of composites with improved electrical resistivity.Keywords
All Related Versions
- Version 1, 2023-06-14, Preprints
- Published version: Journal of Composite Materials, 58 (1), 109.
This publication has 16 references indexed in Scilit:
- Macro copper-graphene composites with enhanced electrical conductivityJournal of Alloys and Compounds, 2022
- Ultrahigh Electrical Conductivity of Graphene Embedded in MetalsAdvanced Functional Materials, 2019
- An investigation on the effect of sintering mode on various properties of copper-graphene metal matrix compositeAdvanced Powder Technology, 2017
- Copper matrix composites enhanced by silver/reduced graphene oxide hybridsMaterials Letters, 2017
- Microstructure and properties characterization of tungsten–copper composite materials doped with grapheneJournal of Alloys and Compounds, 2017
- Preparation of graphite flakes/Al with preferred orientation and high thermal conductivity by squeeze castingCarbon, 2015
- Highly enhanced mechanical properties in Cu matrix composites reinforced with graphene decorated metallic nanoparticlesJournal of Materials Science, 2014
- Nanoscale Mapping of Electrical Resistivity and Connectivity in Graphene Strips and NetworksNano Letters, 2010
- Ultrahigh electron mobility in suspended grapheneSolid State Communications, 2008
- Measurement and correlation of the (p, ρ, T) relation of ethane II. Saturated-liquid and saturated-vapour densities and vapour pressures along the entire coexistence curveThe Journal of Chemical Thermodynamics, 2002