Experimental Investigation of a Free-Form Honed Cylinder Liner for Heavy-Duty Engines
Open Access
- 16 April 2024
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 12 (4) , 132
Abstract
For future internal combustion engines, driven by regenerative fuels, efficiency is more important than ever. One approach to reduce the losses inside the piston cylinder unit (PCU) is to improve the alignment of the liner and the piston. Therefore, a cylinder liner with a free form was developed at the Institute of Technical Combustion (ITV) of the Leibniz University Hannover which compensates radial and linear deformations along the stroke. The layout is based on a FEM simulation. The liner was manufactured by the Institute of Production Engineering and Machine Tools (IFW) of Leibniz University of Hannover with a novel turn-milling process. The liner was investigated on the heavy-duty Floating-Liner engine of ITV with a displacement of 1991 ccm and a bore diameter of 130 mm. The experimental results show improvement in the friction losses over the whole engine map in the range of 9% and up to 17.3% compared to a serial liner. Sealing efficiency could be improved up to 28.8%, depending on the operational point. Overall, the investigation aims for lower fuel consumption which would in result fewer emissions.Keywords
Funding Information
- German Federal Ministry for Economic Affairs and Energy (BMWi)
- Leibniz University Hannover
This publication has 19 references indexed in Scilit:
- Effect of Freeform Honing on the Geometrical Performance of the Cylinder Liner—Numerical StudySAE International Journal of Engines, 2022
- Controlled Turning Process for the Production of Friction-Reduced Cylinder Liners with a Defined Free-Form GeometryJournal of Machine Engineering, 2021
- Predictive Piston Cylinder Unit Simulation - Part I: Novel Findings on Cyclic Inter-Ring Pressure Measurements and Piston Ring Dynamic Simulation ValidationSAE International Journal of Advances and Current Practices in Mobility, 2021
- Energy Efficient Process Chains for the Production of PowertrainsProcedia Manufacturing, 2020
- A Simplified Methodology for the Analysis of the Cylinder Liner Bore Distortion: Finite Element Analyses and Experimental ValidationsSAE International Journal of Advances and Current Practices in Mobility, 2019
- Comparative study on the friction behaviour of piston/bore interface technologiesAutomotive and Engine Technology, 2019
- Cylinder liner deformation orders and efficiency of a piston ring-packE3S Web of Conferences, 2019
- A Review of Automotive Engine Friction Reduction Opportunities Through Technologies Related to TribologyTransactions of the Indian Institute of Metals, 2016
- Moderne Methoden zur Optimierung von ZylinderverzügenMTZ - Motortechnische Zeitschrift, 2015
- Graded Freeform Machining of Cylinder Bores using Form HoningSAE International Journal of Advances and Current Practices in Mobility, 2015