Fretting Stresses in Single Crystal Superalloy Turbine Blade Attachments
- 27 June 2000
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 123 (2) , 413-423
Abstract
Single crystal nickel base superalloy turbine blades are being utilized in rocket engine turbopumps and turbine engines because of their superior creep, stress rupture, melt resistance, and thermomechanical fatigue capabilities over polycrystalline alloys. High cycle fatigue induced failures in aircraft gas turbine and rocket engine turbopump blades is a pervasive problem. Blade attachment regions are prone to fretting fatigue failures. Single crystal nickel base superalloy turbine blades are especially prone to fretting damage because the subsurface shear stresses induced by fretting action at the attachment regions can result in crystallographic initiation and crack growth along octahedral planes. This paper presents contact stress evaluation in the attachment region for single crystal turbine blades used in the NASA alternate advanced high pressure fuel turbo pump for the space shuttle main engine. Single crystal materials have highly anisotropic properties making the position of the crystal lattice relative to the part geometry a significant factor in the overall analysis. Blades and the attachment region are modeled using a large-scale three-dimensional finite element model capable of accounting for contact friction, material anisotropy, and variation in primary and secondary crystal orientation. Contact stress analysis in the blade attachment regions is presented as a function of coefficient of friction and primary and secondary crystal orientation. Fretting stresses at the attachment region are seen to vary significantly as a function of crystal orientation. The stress variation as a function of crystal orientation is a direct consequence of the elastic anisotropy of the material. Fatigue life calculations and fatigue failures are discussed for the airfoil and the blade attachment regions.Keywords
This publication has 15 references indexed in Scilit:
- Effect of Crystal Orientation on Fatigue Failure of Single Crystal Nickel Base Turbine Blade Superalloys2000
- Aspects of equivalence between contact mechanics and fracture mechanics: theoretical connections and a life-prediction methodology for fretting-fatigueActa Materialia, 1998
- Mechanics of fretting fatigue crack formationWear, 1996
- Fatigue in Single Crystal Nickel Superalloys1994
- Variables of Fretting Process: Are There 50 of Them?1992
- Mechanisms of Fretting-Fatigue and Their Impact on Test Methods Development1992
- The unusual near-threshold FCG behavior of a single crystal superalloy and the resolved shear stress as the crack driving forceEngineering Fracture Mechanics, 1989
- On fretting mapsWear, 1988
- A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADINGFatigue & Fracture of Engineering Materials & Structures, 1988
- An investigation of fatigue and fretting in a dovetail jointExperimental Mechanics, 1984