Three-Point Bending Properties of Hybrid Multi-Materials Using Adhesive Bonding Dependent on Strength Difference between Steel and Aluminum
Open Access
Abstract
The mechanical behaviors of two multi-materials, DP590 (steel sheet)–A356 (cast aluminum alloy) and SS330 (steel sheet)–A5052 (aluminum sheet), were studied. A structural adhesive was used for the joining of steel and aluminum at adhesion strengths of 10, 22, and 30 MPa. To demonstrate that the three-point bending properties depend on the difference in strength between steel and aluminum and adhesion strength, optical microscopy (OM), scanning electron microscopy (SEM), and finite-element analysis (FEA) were performed. According to the results of the bending tests on both multi-materials under the same stacking conditions, the flexural stress increased with the improvement in the adhesion strength until interface separation or aluminum fracture. At the same adhesion strength, the DP590 (lower)–A356 (upper) and SS330 (upper)–A5052 (lower) configurations exhibited a tendency to decrease in the sudden stress drop due to aluminum fracture and interface separation. The bending results were analyzed through the FEA and the stress distribution as a function of the stacking and adhesion strength was confirmed.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning (20214000000010, 20004117, NRF-2021R1F1A1046846)
- Korea Evaluation Institute of Industrial Technology (20214000000010, 20004117, NRF-2021R1F1A1046846)
- National Research Foundation of Korea (20214000000010, 20004117, NRF-2021R1F1A1046846)
This publication has 33 references indexed in Scilit:
- Friction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructureMaterials Science and Engineering: A, 2012
- The Effect of Different Surface Pretreatment Methods on Nano-adhesive Application in High Strength Steel and Aluminum BondingJournal of Adhesion Science and Technology, 2011
- Comparison of the Mechanical Behaviour Between Stiff and Flexible Adhesive Joints for the Automotive IndustryThe Journal of Adhesion, 2010
- Self-piercing riveting of high tensile strength steel and aluminium alloy sheets using conventional rivet and dieJournal of Materials Processing Technology, 2009
- Mechanics of mechanically fastened joints in polymer–matrix composite structures – A reviewComposites Science and Technology, 2009
- Adhesively bonded joints in composite materials: An overviewProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2009
- Effect of nano-Al2O3 on adhesion strength of epoxy adhesive and steelInternational Journal of Adhesion and Adhesives, 2008
- Analysis of plastic bending of adhesive-bonded sheet metals taking account of viscoplasticity of adhesiveJournal of Materials Processing Technology, 2003
- Development of a sensor information integrated expert system for optimizing die polishingRobotics and Computer-Integrated Manufacturing, 2001
- Structural adhesive joints in engineeringThin-Walled Structures, 1985