Corrosion of 2024 alloy after ultrasonic impact cladding with iron
- 1 April 2018
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 34 (4) , 324-329
Abstract
The iron-containing layers were produced on the 2024 alloy surface using ultrasonic impact treatment (UIT) in the ambient air and argon environment. Multiple high-energy collisions of the pin of Armco-iron by the treated surface induce the iron cladding by means of solid-state welding of Fe dopants and Al substrate. SEM and EDX analysis and microhardness measurements showed a formation of oxide/intermetallic layers, which thickness ranges from 15–20 to 30–35 μm and hardness achieves ∼4 and ∼9 GPa after the argon-UIT and air-UIT processes, respectively. The polarisation tests in 3.5%NaCl medium showed that the layers are characterised by lower corrosion rates and more positive corrosion potentials than those of the original alloy owing to the formation of Alx-Fey intermetallics. The noblest behaviour was registered for the air-UIT-processed 2024 alloy.Keywords
Funding Information
- Ministry of Education and Science of Ukraine (0115U002320)
- National Academy of Sciences of Ukraine (0114U001127)
- Ministry of Education and Science of Ukraine (0115U002320)
- National Academy of Sciences of Ukraine (0114U001127)
This publication has 26 references indexed in Scilit:
- On the formation of intermetallics in Fe–Al system – An in situ XRD studyIntermetallics, 2013
- Ultrafine-grained textured surface layer on Zr–1%Nb alloy produced by ultrasonic impact peening for enhanced corrosion resistanceSurface and Coatings Technology, 2012
- Iron aluminide coating on Al by mechanical alloyingSurface Engineering, 2011
- Fabrication of nanostructured Mo coatings on Al and Ti substrates by ball impact claddingSurface and Coatings Technology, 2010
- Microstructure and mechanical properties of Al–Fe in situ nanocomposite produced by friction stir processingIntermetallics, 2008
- Production of alloyed nanocrystalline surfaces by combined punching, sandblasting and recovery treatmentsScripta Materialia, 2008
- In situ synthesis of nanocrystalline intermetallic layer during surface plastic deformation of zirconiumSurface and Coatings Technology, 2007
- Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steelMaterials Science and Engineering: A, 2007
- Formation mechanism of Fe3Al and FeAl intermetallic compounds during mechanical alloyingJournal of Materials Science, 2005
- Electrochemical Characteristics of Intermetallic Phases in Aluminum AlloysJournal of the Electrochemical Society, 2005