Interfacial Solvent Molecular Engineering via High‐Safety Dense Separators for High‐Rate Lithium‐Ion Batteries
Authors:
Open Access
- 13 February 2026
- journal article
- Published by Wiley in Energy & Environmental Materials
- Vol. 9 (5)
Abstract
To address the conflicting challenges of energy density, rate performance, and safety in lithium metal batteries and self‐generated lithium metal anodes, we propose a synergistic optimization strategy that employs a high‐density polyphenylene sulfide (PPS‐separator) and a dimethyl carbonate‐based electrolyte. Density functional theory calculations and experiments demonstrate that due to its weak polyphenylene sulfide adsorption energy (−0.3261 eV) and small molecular size, the dimethyl carbonate solvent can construct efficient ion hopping channels at the polyphenylene sulfide crystal interface, achieving a room‐temperature ionic conductivity of 1.02 × 10 −3 S cm −1 (3.5 times that of conventional ceramic separators). Functional additives (LiPO 2 F 2 /FEC/VC) are used to optimize the electrode interface, forming a LiF/Li 2 CO 3 dual‐phase composite SEI, which drives uniform two‐dimensional lithium metal deposition and reduces interfacial impedance. The system has been stably cycled 435 cycles under extreme conditions, maintaining a capacity retention of over 80%. The intrinsic flame retardancy of polyphenylene sulfide‐separator, coupled with its minimal electrolyte requirements, facilitates electrolyte vaporization‐induced self‐blocking of ion channels during nail penetration tests. This effectively suppresses thermal runaway in 6‐Ah high‐nickel NCM811/SiC pouch cells, keeping peak temperatures below 50 °C and offering a novel approach to resolving the trade‐off between high energy density and high safety.Keywords
Funding Information
- Natural Science Foundation of Jiangsu Province (SBK2017041705)
- National Natural Science Foundation of China (51702131)
- National Natural Science Foundation of China (51774151)
- National Natural Science Foundation of China (22208130)
This publication has 43 references indexed in Scilit:
- Developing High‐Performance Anode‐Free Lithium Batteries: Challenges, Strategies, and OpportunitiesAdvanced Functional Materials, 2025
- Superior High‐Rate Ni‐Rich Lithium Batteries Based on Fast Ion‐Desolvation and Stable Solid‐Electrolyte InterphaseAdvanced Science, 2025
- Sulfide/Polymer Composite Solid‐State Electrolytes for All‐Solid‐State Lithium BatteriesAdvanced Energy Materials, 2024
- Dilute Electrolytes with Fluorine‐Free Ether Solvents for 4.5 V Lithium Metal BatteriesAngewandte Chemie International Edition, 2024
- LiF‐Rich Alloy‐Doped SEI Enabling Ultra‐Stable and High‐Rate Li Metal AnodeAngewandte Chemie International Edition, 2024
- A Safe Ether Electrolyte Enabling High‐Rate Lithium Metal BatteriesAdvanced Functional Materials, 2024
- Directing Fluorinated Solid Electrolyte Interphase by Solubilizing Crystal Lithium Fluoride in Aprotic Electrolyte for Lithium Metal BatteriesAdvanced Energy Materials, 2024
- Synergy of Weakly‐Solvated Electrolyte and Optimized Interphase Enables Graphite Anode Charge at Low TemperatureAngewandte Chemie International Edition, 2022
- Anode‐Free Solid‐State Lithium Batteries: A ReviewAdvanced Energy Materials, 2022
- Formation of LiF‐rich Cathode‐Electrolyte Interphase by Electrolyte ReductionAngewandte Chemie International Edition, 2022