Haitao Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Haitao Zhou has a total of 116 co-authors. Here are the top co-authors by number of shared publications:
Hongquan Gao
13 shared publicationsJianhong Yang
School of Materials Science and Engineering Jiangsu University Jiangsu Province 212013 P. R. China
9 shared publications- De Chen
State Key Laboratory of Chemical Engineering and Low-carbon Technology, School of Chemical Engineering, East China University of Science and Technology, Shanghai, China
8 shared publications - Fride Vullum-Bruer
SINTEF Energy, Trondheim, NO-7491, Norway
8 shared publications Haiyun Zhou
Jiangsu Tongling Electric Co., Ltd. Zhenjiang Jiangsu 212200 China
8 shared publicationsJian-Chun Wu
7 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by Elsevier in Materials Today Sustainability
- Vol. 35
Hydrophilic-modified polyphenylene sulfide membranes for the co-extraction of lithium, rubidium and caesium from lithium mica ore
- 2 July 2026
- Published by Elsevier in Materials Today Sustainability
- Vol. 35
Open AccessHydrophilic-modified polyphenylene sulfide membranes for the co-extraction of lithium, rubidium and caesium from lithium mica ore
- Open Access
- 28 May 2026
- Published by Elsevier in SSRN Electronic Journal
Ion-Sieving Solvent-Free Polyphenylene Sulfide Separators for Dendrite Suppression in Long-Cycle Zinc-Ion Batteries
Aqueous zinc-ion batteries (ZIBs) are fundamentally impeded by dendrite proliferation and parasitic reactions, issues exacerbated by the non-selective ion transport of conventional porous separators. Employing a scalable solvent-free dry process, we engineered a flexible solid-state composite separator comprising a dense polyphenylene sulfide (PPS) core laminated with hydrophilic cellulose/polyethylene outer layers. The non-porous PPS barrier physically obstructs dendrite penetration and restricts free water to mitigate parasitic reactions, while the hydrophilic layers ensure electrolyte wettability. First-principles calculations reveal a minimal Zn²⁺ diffusion barrier of 0.013 eV on PPS(200) facets, facilitating selective Zn²⁺ transport and homogeneous interfacial flux consistent with Sand’s time model. Consequently, the Zn²⁺ transference number reaches 0.67, which is three times that of glass fiber separators (0.22), enabling dendrite-free Zn plating/stripping. Symmetric Zn||Zn cells cycle stably for over 1,000 hours at 1 mA cm⁻². Furthermore, Zn||MnO₂ full cells with commercial-level mass-loading cathodes (10 mg cm⁻²) deliver an areal capacity of 1.8 mAh cm⁻² and retain 71% capacity after 1,000 cycles at 1.0 C. This structure–property correlation validates the scalability of PPS-based separators for industrial ZIBs.
- 28 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessIon-Sieving Solvent-Free Polyphenylene Sulfide Separators for Dendrite Suppression in Long-Cycle Zinc-Ion Batteries
Aqueous zinc-ion batteries (ZIBs) are fundamentally impeded by dendrite proliferation and parasitic reactions, issues exacerbated by the non-selective ion transport of conventional porous separators. Employing a scalable solvent-free dry process, we engineered a flexible solid-state composite separator comprising a dense polyphenylene sulfide (PPS) core laminated with hydrophilic cellulose/polyethylene outer layers. The non-porous PPS barrier physically obstructs dendrite penetration and restricts free water to mitigate parasitic reactions, while the hydrophilic layers ensure electrolyte wettability. First-principles calculations reveal a minimal Zn²⁺ diffusion barrier of 0.013 eV on PPS(200) facets, facilitating selective Zn²⁺ transport and homogeneous interfacial flux consistent with Sand’s time model. Consequently, the Zn²⁺ transference number reaches 0.67, which is three times that of glass fiber separators (0.22), enabling dendrite-free Zn plating/stripping. Symmetric Zn||Zn cells cycle stably for over 1,000 hours at 1 mA cm⁻². Furthermore, Zn||MnO₂ full cells with commercial-level mass-loading cathodes (10 mg cm⁻²) deliver an areal capacity of 1.8 mAh cm⁻² and retain 71% capacity after 1,000 cycles at 1.0 C. This structure–property correlation validates the scalability of PPS-based separators for industrial ZIBs.
- Open Access
- 13 February 2026
- Published by Wiley in Energy & Environmental Materials
- Vol. 9 (5)
Interfacial Solvent Molecular Engineering via High‐Safety Dense Separators for High‐Rate Lithium‐Ion Batteries
To address the conflicting challenges of energy density, rate performance, and safety in lithium metal batteries and self‐generated lithium metal anodes, we propose a synergistic optimization strategy that employs a high‐density polyphenylene sulfide (PPS‐separator) and a dimethyl carbonate‐based electrolyte. Density functional theory calculations and experiments demonstrate that due to its weak polyphenylene sulfide adsorption energy (−0.3261 eV) and small molecular size, the dimethyl carbonate solvent can construct efficient ion hopping channels at the polyphenylene sulfide crystal interface, achieving a room‐temperature ionic conductivity of 1.02 × 10 −3 S cm −1 (3.5 times that of conventional ceramic separators). Functional additives (LiPO 2 F 2 /FEC/VC) are used to optimize the electrode interface, forming a LiF/Li 2 CO 3 dual‐phase composite SEI, which drives uniform two‐dimensional lithium metal deposition and reduces interfacial impedance. The system has been stably cycled 435 cycles under extreme conditions, maintaining a capacity retention of over 80%. The intrinsic flame retardancy of polyphenylene sulfide‐separator, coupled with its minimal electrolyte requirements, facilitates electrolyte vaporization‐induced self‐blocking of ion channels during nail penetration tests. This effectively suppresses thermal runaway in 6‐Ah high‐nickel NCM811/SiC pouch cells, keeping peak temperatures below 50 °C and offering a novel approach to resolving the trade‐off between high energy density and high safety.
- 13 February 2026
- Published by Wiley in Energy & Environmental Materials
- Vol. 9 (5)
Open AccessInterfacial Solvent Molecular Engineering via High‐Safety Dense Separators for High‐Rate Lithium‐Ion Batteries
To address the conflicting challenges of energy density, rate performance, and safety in lithium metal batteries and self‐generated lithium metal anodes, we propose a synergistic optimization strategy that employs a high‐density polyphenylene sulfide (PPS‐separator) and a dimethyl carbonate‐based electrolyte. Density functional theory calculations and experiments demonstrate that due to its weak polyphenylene sulfide adsorption energy (−0.3261 eV) and small molecular size, the dimethyl carbonate solvent can construct efficient ion hopping channels at the polyphenylene sulfide crystal interface, achieving a room‐temperature ionic conductivity of 1.02 × 10 −3 S cm −1 (3.5 times that of conventional ceramic separators). Functional additives (LiPO 2 F 2 /FEC/VC) are used to optimize the electrode interface, forming a LiF/Li 2 CO 3 dual‐phase composite SEI, which drives uniform two‐dimensional lithium metal deposition and reduces interfacial impedance. The system has been stably cycled 435 cycles under extreme conditions, maintaining a capacity retention of over 80%. The intrinsic flame retardancy of polyphenylene sulfide‐separator, coupled with its minimal electrolyte requirements, facilitates electrolyte vaporization‐induced self‐blocking of ion channels during nail penetration tests. This effectively suppresses thermal runaway in 6‐Ah high‐nickel NCM811/SiC pouch cells, keeping peak temperatures below 50 °C and offering a novel approach to resolving the trade‐off between high energy density and high safety.
- 13 February 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 671
Synergistic interface engineering of stable zinc anode and anti-shuttle separator for high-performance zinc-based dual-ion batteries
- 13 February 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 671
Synergistic interface engineering of stable zinc anode and anti-shuttle separator for high-performance zinc-based dual-ion batteries
- Open Access
Efficient Regulation of Oxygen Vacancies in β-MnO2 Nanostructures for High-Loading Zinc-Ion Batteries
Manganese-based oxides, particularly β-MnO2, have emerged as promising cathode materials for aqueous zinc-ion batteries (ZIBs) due to their high theoretical capacity, low cost, and intrinsic safety. However, their sluggish reaction kinetics, limited active sites, and poor conductivity often lead to suboptimal electrochemical performance. To address these limitations, we propose a facile ethanol-mediated hydrothermal strategy to engineer rod-like β-MnO2 nanostructures with tailored oxygen vacancies. By precisely adjusting ethanol addition (3–5 mL) during synthesis, oxygen vacancy concentrations were optimized to enhance electronic conductivity and active site exposure. The experimental results demonstrate that β-MnOx-2-5 synthesized with 5 mL of ethanol delivers an exceptional areal capacity of 4.87 mAh cm−2 (348 mAh g−1, 469.8 Wh kg−1) at 200 mA cm−2 under a high mass loading of 14 mg cm−2. Further, a hybrid electrode combining oxygen-deficient β-MnO2-x-3 (air-calcined) and structurally stable β-Mn5O8-y-3 (Ar-calcined) achieves a retained capacity of 3.9 mAh cm−2 with stable cycling performance, achieving an optimal equilibrium between high capacity and long-term operational durability. Systematic characterizations (XPS, ESR, XANES, FT-EXAFS) confirm vacancy-induced electronic structure modulation, accelerating ion diffusion and redox kinetics. This scalable vacancy engineering approach, requiring only ethanol dosage control, presents a viable pathway toward industrial-scale ZIB applications.
Open AccessEfficient Regulation of Oxygen Vacancies in β-MnO2 Nanostructures for High-Loading Zinc-Ion Batteries
Manganese-based oxides, particularly β-MnO2, have emerged as promising cathode materials for aqueous zinc-ion batteries (ZIBs) due to their high theoretical capacity, low cost, and intrinsic safety. However, their sluggish reaction kinetics, limited active sites, and poor conductivity often lead to suboptimal electrochemical performance. To address these limitations, we propose a facile ethanol-mediated hydrothermal strategy to engineer rod-like β-MnO2 nanostructures with tailored oxygen vacancies. By precisely adjusting ethanol addition (3–5 mL) during synthesis, oxygen vacancy concentrations were optimized to enhance electronic conductivity and active site exposure. The experimental results demonstrate that β-MnOx-2-5 synthesized with 5 mL of ethanol delivers an exceptional areal capacity of 4.87 mAh cm−2 (348 mAh g−1, 469.8 Wh kg−1) at 200 mA cm−2 under a high mass loading of 14 mg cm−2. Further, a hybrid electrode combining oxygen-deficient β-MnO2-x-3 (air-calcined) and structurally stable β-Mn5O8-y-3 (Ar-calcined) achieves a retained capacity of 3.9 mAh cm−2 with stable cycling performance, achieving an optimal equilibrium between high capacity and long-term operational durability. Systematic characterizations (XPS, ESR, XANES, FT-EXAFS) confirm vacancy-induced electronic structure modulation, accelerating ion diffusion and redox kinetics. This scalable vacancy engineering approach, requiring only ethanol dosage control, presents a viable pathway toward industrial-scale ZIB applications.
- Open Access
Recent Advances in Polyphenylene Sulfide-Based Separators for Lithium-Ion Batteries
Polyphenylene sulfide (PPS)-based separators have garnered significant attention as high-performance components for next-generation lithium-ion batteries (LIBs), driven by their exceptional thermal stability (>260 °C), chemical inertness, and mechanical durability. This review comprehensively examines advances in PPS separator design, focusing on two structurally distinct categories: porous separators engineered via wet-chemical methods (e.g., melt-blown spinning, electrospinning, thermally induced phase separation) and nonporous solid-state separators fabricated through solvent-free dry-film processes. Porous variants, typified by submicron pore architectures (1 mS·cm−1 at >55% porosity, while their nonporous counterparts leverage crystalline sulfur-atom alignment and trace electrolyte infiltration to establish solid–liquid biphasic conduction pathways, achieving ion transference numbers >0.8 and homogenized lithium flux. Dry-processed solid-state PPS separators demonstrate unparalleled thermal dimensional stability (−1), intrinsically safe energy storage systems, particularly in applications demanding extreme operational reliability such as electric vehicles and grid-scale storage.
Open AccessRecent Advances in Polyphenylene Sulfide-Based Separators for Lithium-Ion Batteries
Polyphenylene sulfide (PPS)-based separators have garnered significant attention as high-performance components for next-generation lithium-ion batteries (LIBs), driven by their exceptional thermal stability (>260 °C), chemical inertness, and mechanical durability. This review comprehensively examines advances in PPS separator design, focusing on two structurally distinct categories: porous separators engineered via wet-chemical methods (e.g., melt-blown spinning, electrospinning, thermally induced phase separation) and nonporous solid-state separators fabricated through solvent-free dry-film processes. Porous variants, typified by submicron pore architectures (1 mS·cm−1 at >55% porosity, while their nonporous counterparts leverage crystalline sulfur-atom alignment and trace electrolyte infiltration to establish solid–liquid biphasic conduction pathways, achieving ion transference numbers >0.8 and homogenized lithium flux. Dry-processed solid-state PPS separators demonstrate unparalleled thermal dimensional stability (−1), intrinsically safe energy storage systems, particularly in applications demanding extreme operational reliability such as electric vehicles and grid-scale storage.
- 7 March 2025
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (8)
Boosting the Mechanical and Electrochemical Performance of MnO2 Dry Electrode with Bentonite for Ampere‐Hour Aqueous Zn‐ion Batteries
Aqueous zinc‐ion batteries, distinguished by their robust safety, abundance, and cost‐effectiveness, represent an ideal solution for wearable devices, backup power sources, and microgrid energy storage applications. Among various cathode materials, MnO2 stands out as one of the most promising candidates due to its high potential relative to Zn, high theoretical specific capacity, low cost, and non‐toxicity. However, the electrochemical performance of MnO2 cathode is hindered by Mn death and pH fluctuations. Additionally, the internal inhomogeneity resulting from solvent evaporation during the slurry coating process further compromises their stability. In this study, we introduce a modification using sodium‐based bentonite and successfully fabricate high‐loading industrial‐grade electrolytic MnO2 cathode through a pilot‐scale solvent‐free dry process. The sodium‐based bentonite enhances the structural stability of the electrode by forming Na−F bonds with polytetrafluoroethylene and optimizes Zn2+ transport through its ion‐exchange properties to regulate pH. Impressively, high‐loading Ben‐SFC//Zn battery, with a loading exceeding 10 mg cm−2, maintains a coulombic efficiency above 98 % and capacity of 80 % after approximately 400 cycles. Similarly, a 3Ah aqueous pouch cell demonstrates stable cycling over 400 cycles. This research not only addresses the challenges in manufacturing process of practical high‐loading MnO2 dry electrodes but also elevates the electrochemical performance of batteries.
- 7 March 2025
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (8)
Boosting the Mechanical and Electrochemical Performance of MnO2 Dry Electrode with Bentonite for Ampere‐Hour Aqueous Zn‐ion Batteries
Aqueous zinc‐ion batteries, distinguished by their robust safety, abundance, and cost‐effectiveness, represent an ideal solution for wearable devices, backup power sources, and microgrid energy storage applications. Among various cathode materials, MnO2 stands out as one of the most promising candidates due to its high potential relative to Zn, high theoretical specific capacity, low cost, and non‐toxicity. However, the electrochemical performance of MnO2 cathode is hindered by Mn death and pH fluctuations. Additionally, the internal inhomogeneity resulting from solvent evaporation during the slurry coating process further compromises their stability. In this study, we introduce a modification using sodium‐based bentonite and successfully fabricate high‐loading industrial‐grade electrolytic MnO2 cathode through a pilot‐scale solvent‐free dry process. The sodium‐based bentonite enhances the structural stability of the electrode by forming Na−F bonds with polytetrafluoroethylene and optimizes Zn2+ transport through its ion‐exchange properties to regulate pH. Impressively, high‐loading Ben‐SFC//Zn battery, with a loading exceeding 10 mg cm−2, maintains a coulombic efficiency above 98 % and capacity of 80 % after approximately 400 cycles. Similarly, a 3Ah aqueous pouch cell demonstrates stable cycling over 400 cycles. This research not only addresses the challenges in manufacturing process of practical high‐loading MnO2 dry electrodes but also elevates the electrochemical performance of batteries.
- Open Access
- 4 December 2024
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 21
Dense integration of chlorocatechols crosslinked polyphenylene sulfide solid-state separator for Li metal-free batteries
- 4 December 2024
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 21
Open AccessDense integration of chlorocatechols crosslinked polyphenylene sulfide solid-state separator for Li metal-free batteries
Zn‐In Alloying Powder Solvent Free Electrode Toward High‐Load Ampere‐Hour Aqueous Zn‐Mn Secondary Batteries
Aqueous Zn‐ion batteries (ZIBs) are promising candidates for large‐scale energy storage due to high safety, abundant reserves, low‐cost, and high energy density. However, the reversibility of the metallic Zn anode in the mild electrolyte is still unsatisfactory, due to the Zn dendrite growth, hydrogen evolution, and corrosion passivation. Herein, a Zn‐In alloying powder solvent free electrode is proposed to replace the Zn foil in ZIBs. The novel Zn anodes are constructed by a solvent‐free manufacturing process with carbons, forming a 3D Zn deposition network and providing uniformly electric field distribution. The In on the Zn powder surface can increase the overpotential for hydrogen evolution and further improve the morphology of Zn deposition against dendrite growth. The Zn solvent‐free electrodes enable the Zn‐MnO2 batteries with high cathode loading mass of 10–20 mg cm−2 to achieve >380 stable cycles. Furthermore, the assembled soft package batteries of 2.4 Ah (52 Wh kg−2) is evaluated and the capacity retention is maintained at 80% after 200 cycles at a high areal capacity of 5 mAh cm−2 without gas evolution. This work offers a workable strategy to develop a durable Zn anode for the eventually commercial applications of aqueous Zn‐Mn secondary batteries.
Zn‐In Alloying Powder Solvent Free Electrode Toward High‐Load Ampere‐Hour Aqueous Zn‐Mn Secondary Batteries
Aqueous Zn‐ion batteries (ZIBs) are promising candidates for large‐scale energy storage due to high safety, abundant reserves, low‐cost, and high energy density. However, the reversibility of the metallic Zn anode in the mild electrolyte is still unsatisfactory, due to the Zn dendrite growth, hydrogen evolution, and corrosion passivation. Herein, a Zn‐In alloying powder solvent free electrode is proposed to replace the Zn foil in ZIBs. The novel Zn anodes are constructed by a solvent‐free manufacturing process with carbons, forming a 3D Zn deposition network and providing uniformly electric field distribution. The In on the Zn powder surface can increase the overpotential for hydrogen evolution and further improve the morphology of Zn deposition against dendrite growth. The Zn solvent‐free electrodes enable the Zn‐MnO2 batteries with high cathode loading mass of 10–20 mg cm−2 to achieve >380 stable cycles. Furthermore, the assembled soft package batteries of 2.4 Ah (52 Wh kg−2) is evaluated and the capacity retention is maintained at 80% after 200 cycles at a high areal capacity of 5 mAh cm−2 without gas evolution. This work offers a workable strategy to develop a durable Zn anode for the eventually commercial applications of aqueous Zn‐Mn secondary batteries.